Installation Guide




Troubleshooting

LEGACY WIRING
ACU LEDS
READER LED
PROVISIONING THE ACU
RESETTING THE ACU

LEGACY WIRING

Sometimes legacy wiring (unshielded and straight through, rather than shielded twisted pair, often
22-6) results in slower connections and dropped packets between the Openpath Reader and Smart
Hub. To remedy this, you can switch GND and VIN with +B and -A connections on the ACU and
readers to ensure the data pair (+B and -A) are using the alternate pair of legacy wires.

ACU LEDS


The Openpath ACU has several LEDs that indicate the following:

● POWER LEDs indicate that the ACU is connected to power

Version 1.5
© Openpath 2019
Page 14
