Installation Guide
PROVISIONING THE ACU
Provisioning the ACU means registering it in the online portal and getting it up and running with
the latest firmware. ACUs are shipped already provisioned, but below are instructions for this
process in the case of RESETTING THE ACU.
To provision the ACU:
1. Connect the ACU to the Internet via Ethernet
2. Press the ADMIN BUTTON
3. On a computer or mobile phone on the same network as the ACU, go to
https://control.openpath.com
4. Log in with your administrative login
5. Go to Hardware > ACU Management
6. Locate the ACU on the list and click Register
7. A new window will open with instructions on registering the ACU. Click Yes to proceed.
Version 1.5
©
Openpath 2019
Page 16