Installation Guide





Openpath Access Control System Installation Guide
GETTING STARTED
ADDITIONAL RESOURCES
PRIOR TO INSTALLATION
Installation
NETWORK REQUIREMENTS
SELECTING A BACKUP BATTERY
MOUNTING INSTRUCTIONS
RECOMMENDED CONFIGURATION
WIRING WITH THE 12/24V POWER SUPPLY
WIRING THE REX WITH THE DOOR STRIKE
WIRING THE REX WITH THE ELECTROMAGNETIC LOCK
WIRING FAIL SAFE AND FAIL SECURE LOCKING HARDWARE
WIRING TO LEGACY PANELS
WIRING THE OPENPATH ELEVATOR BOARD
Troubleshooting
LEGACY WIRING
ACU LEDS
READER LEDS
RESETTING THE ACU
PROVISIONING THE ACU
Regulatory
UL
CAN/ULC 60831-11-1-16 GRADE 1
FCC
IEC 62368-1
Warnings

 

Version 1.5
© Openpath 2019
Page 2
