User's Manual

Rigado

SCS-001 USER GUIDE

Project / Subproject:

SCS-001

Reference Number / Version:

0.2

Issue Date:

4/21/2015

Document File Name:

SCS-001_User_Guide.docx

Page:

11 of 11

3.6 Enable Characteristic (b7717580-b82a-4502-bd90-7f703fba1324)

The enable characteristic is used to enable the beacon service to advertise. To enable or disable to the beacon

select use the slide button. Once enabled, the beacon will start advertising after you exit the BMDware

Configuration page. In the case of another application once the Beacon configuration service is disconnected, the

beacon will being advertising. Figure 7 shows examples of the beacon enable characteristic.

Figure 7: Beacon disabled (left). Beacon enabled (right).

Characteristic UUID

Length

Disable Value

Enable Value

b7717580-b82a-4502-bd90-7f703fba1324

1 Bytes

Figure 8: Beacon Enable Characteristic information

After enabling the beacon in the beacon configuration service, exit the beacon configuration service to start beacon

advertisement. In the BMDware Home page you will now see a new “Unknown” device advertising. This

unknown device will be the beacon (non-connectable).

Figure 8: Beacon enabled and advertising