RIGE TECHNOLOGY CO.
RIGE TECHNOLOGY CO., LIMITED Congratulations on purchasing this 300W BEAM moving head. Thank you for extending your trust in our technology! For reasons of safety and approval (CE) the personal reconstruction and/or modification of this product is prohibited. Please observe that damage caused by modifications performed manually to this device is not covered by the warranty. This product leaves our works in a perfect condition.
RIGE TECHNOLOGY CO., LIMITED 2. Supply Voltage, Mains Cord and Connection to Mains ATTENTION: DANGER OF LIFE! RISK OF FIRE! RISK OF SHORT CIRCUIT! The handling of supply voltage, mains cords and connections to mains calls for particular care considering the risk from a life-threatening electric shock, the risk of fire and the risk of short circuits! Please observe the following notes in particular: Products operating on supply voltage should be kept out of the reach of children.
RIGE TECHNOLOGY CO., LIMITED Easily flammable materials, e.g. decoration material and other surfaces and objects, must maintain a minimum distance of 3m to the housing! Walls must maintain a minimum distance of 50cm to the housing! The device must be installed on a fireproof surface only (no carpet)! Always ensure a proper circulation of air. Do not touch the housing during operation - it will heat up. The housing is safe to touch approx.
RIGE TECHNOLOGY CO., LIMITED This product can be operated suspended or as a stand-alone system. Should your lighting effect show any signs of damage, do not install the device! In this case, have your lighting effect repaired by your specialized dealer.
RIGE TECHNOLOGY CO., LIMITED dis/connecting the product repeatedly and quickly from/with mains! Always wait 15 minutes prior to the next dis/connection! The device starts until a self-testing and starting time. If the moving head is ready to start, push and roll the function wheel. The LCD display shows the options, as follows: Menu settings: 8 8 8 8 ESC UP DOWN ENTER DMX512 [address set] This feature allows the user to change device address value 1. Press the ESC key until shows "A001".
RIGE TECHNOLOGY CO., LIMITED Test running. If need to exit, press "ESC" exit 2. Ast (mainframe controls) This feature allows you to run the test when need be host DMX synchronized signal sent out to vice machine use. Press the "UP" or "DOWN" choose other mode, click "ENTER" , show "ON" as host send signals, DMX signal indicator emit light. Display "OFF" not to send out signals, DMX signal lights out, press "ENTER" sure to save exit, press "ESC" non-preservation exit.
RIGE TECHNOLOGY CO.
RIGE TECHNOLOGY CO., LIMITED 7. Lamps ATTENTION: DANGER OF LIFE! RISK OF BURNS! RISK OF FIRE! During operation, the lamps will reach temperatures of up to 200°C. Touching the lamps may cause serious burns! Objects coming into contact with the lamps during and shortly after operation may catch fire! Disconnect the product from mains prior to installing or before changing a lamp! Allow a lamp to cool for approx.
RIGE TECHNOLOGY CO., LIMITED Ensure that the product is completely dry before operating it again after cleaning! 10. Transport CAUTION: FRAGILE! To avoid damage caused during transport, wrap the product in its original packaging only and handle it with great care during transport! Please note: All information is subject to change without prior notice.