ia n g Li g ht in g T ec hn o lo gy C o. ,L td RG-P47IC10-KE7A —RGBW 4IN1 10W7Leds Indoor Par Can G ua ng z ho u G el USER MANUAL Guangzhou Geliang Lighting Technology Co.,Ltd Tel:+8620-86872001/2/3 www.rigelighting.
CONTENS 1. GENERAL INFORMATION 1 2 ,L td 2. PACKING LIST 3. SCHEMATIC DIAGRAM C o. 2 2 gy 4. PRODUCT FEATURES lo 5. TECHNICAL SPECIFICATIONS ec 7. UNDERSTANDING DMX 4 6 7 10. MAINTENANCE AND CLEANING 7 Li g ht 9. DMX CHANNEL TRAITS ng z ho u G el ia n g 11. 1-YEAR LIMITED WARRANTY ua 3 in g T 8. CONTROL BOARD G hn o 6.
RGBW 4IN1 10W7Leds Indoor Par Can 1. GENERAL INFORMATION ,L td INTRODUCTION: Congratulations, you have just purchased one of the most innovative and reliable lighting fixtures on the market today! The Par Can has been designed to perform reliably for years when the guidelines in this booklet are followed. Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this unit.
RGBW 4IN1 10W7Leds Indoor Par Can 2. PACKING LIST ,L td RGBW 4IN1 10W7Leds Indoor Par Can 1 pcs User Manual 1 pcs Power cable 1 pcs 3-XLR signal cable 1 pcs u G el ia n g Li g ht in g T ec hn o lo gy C o. 3. SCHEMATIC DIAGRAM ho 4. PRODUCT FEATURES G ua ng z Unlimited programming effects Professional color mixing Soft light effect High power Led 10W /pcs RGBW 4IN1 32-bit color (16.
RGBW 4IN1 10W7Leds Indoor Par Can 5. TECHNICAL SPECIFICATIONS Li g ht in g T ec hn o lo gy C o.
RGBW 4IN1 10W7Leds Indoor Par Can kept at least 0.5m away from any flammable materials (decoration etc.). Always use and install the supplied safety cable as a safety measure to prevent accidental damage and/or injury in the event the clamp fails. C o.
RGBW 4IN1 10W7Leds Indoor Par Can ,L td DMX-512 control connection Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-pin XLR input of the fixture. You can chain multiple fixture together through serial linking. The cable that should be used is two conductor, shielded DMX cable with XLR input and output connectors.
RGBW 4IN1 10W7Leds Indoor Par Can ho u G el ia n g Li g ht in g T ec hn o lo gy C o. ,L td 8. CONTROL BOARD ng z 8.1 ADDR G ua This function is used to set or adjust the fixture’s starting DMX address. Every device controlled by DMX has to have a unique starting address. The addressing feature is what allows DMX to function properly. The DMX address of a fixture is what allows it to communicate with a controller properly.
RGBW 4IN1 10W7Leds Indoor Par Can 8.2 Automatic Mode This function including FLAS,FADE,ACS- ,three modes,which allows the internal programs to run in either stand-alone or master-salve mode. This function allows you to control the fixture via the sound with two different effect. 8.4 Synchronization mode (Master-slave mode) gy C o. In “Master” mode the fixture will send DMX data to other fixtures connect via the DMX chain.
RGBW 4IN1 10W7Leds Indoor Par Can C o. We recommend a frequent cleaning of the device please use a moist , lint-free cloth . Never use alcohol or solvents There are no serviceable parts inside the device please refer to the instructions under “installation instructions”. ,L td cleaning to the fixture 1. Clean the inside and outside lens each week to avoid the weakness of the lights due to accumulation of dust. A detailed electric check by approved electrical engineer each three months, 2.
RGBW 4IN1 10W7Leds Indoor Par Can consequential, arising out of the use of, or inability to use, this product. G. This warranty is the only written warranty applicable to our products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published. G ua ng z ho u G el ia n g Li g ht in g T ec hn o lo gy C o.
G u ho ng z ua g ia n el G in g ht Li g gy lo hn o ec T C o.
