Instruction Manual

PulsGuideJr
ON-OFF/Brightness:) Rotate black knob on
end clockwise to increase, Counter-clockwise to
click off.
LED Blink: Rotate the white knob knob nearest
eyepiece counterclockwise for pulse, clockwise
for faster pulse and continuous on.
Battery Installation: Uses one Duracel XL
DL1/3N lithium battery or equivalent. Pull white
blink knob out of side of body, grasp black
on/off knob and gently pull circuit board out.
Install new battery. Be careful of battery
polarity. Inserting battery with polarity
reversed will damage circuitry and void
warranty.
Remove anti-rattle foam from old battery and
press on new battery. Insert circuit board into
tube compressing anti-rattle foam and slide
ciruit board into body. You may have to rotate
the circuit board as you slide it in to get the LED
to slip into the hole in the front end and also to
align blink potentiometer with hole in side. Insert
white knob through sides of body into hole on
blink potentiometee .
PulsGuideJr
ON-OFF/Brightness:) Rotate black knob on
end clockwise to increase, Counter-clockwise to
click off.
LED Blink: Rotate the white knob knob nearest
eyepiece counterclockwise for pulse, clockwise
for faster pulse and continuous on.
Battery Installation: Uses one Duracel XL
DL1/3N lithium battery or equivalent. Pull white
blink knob out of side of body, grasp black
on/off knob and gently pull circuit board out.
Install new battery. Be careful of battery
polarity. Inserting battery with polarity
reversed will damage circuitry and void
warranty.
Remove anti-rattle foam from old battery and
press on new battery. Insert circuit board into
tube compressing anti-rattle foam and slide
ciruit board into body. You may have to rotate
the circuit board as you slide it in to get the LED
to slip into the hole in the front end and also to
align blink potentiometer with hole in side. Insert
white knob through sides of body into hole on
blink potentiometee .
PulsGuideJr
ON-OFF/Brightness:) Rotate black knob on
end clockwise to increase, Counter-clockwise to
click off.
LED Blink: Rotate the white knob knob nearest
eyepiece counterclockwise for pulse, clockwise
for faster pulse and continuous on.
Battery Installation: Uses one Duracel XL
DL1/3N lithium battery or equivalent. Pull white
blink knob out of side of body, grasp black
on/off knob and gently pull circuit board out.
Install new battery. Be careful of battery
polarity. Inserting battery with polarity
reversed will damage circuitry and void
warranty.
Remove anti-rattle foam from old battery and
press on new battery. Insert circuit board into
tube compressing anti-rattle foam and slide
ciruit board into body. You may have to rotate
the circuit board as you slide it in to get the LED
to slip into the hole in the front end and also to
align blink potentiometer with hole in side. Insert
white knob through sides of body into hole on
blink potentiometee .
PulsGuideJr
ON-OFF/Brightness:) Rotate black knob on
end clockwise to increase, Counter-clockwise to
click off.
LED Blink: Rotate the white knob knob nearest
eyepiece counterclockwise for pulse, clockwise
for faster pulse and continuous on.
Battery Installation: Uses one Duracel XL
DL1/3N lithium battery or equivalent. Pull white
blink knob out of side of body, grasp black
on/off knob and gently pull circuit board out.
Install new battery. Be careful of battery
polarity. Inserting battery with polarity
reversed will damage circuitry and void
warranty.
Remove anti-rattle foam from old battery and
press on new battery. Insert circuit board into
tube compressing anti-rattle foam and slide
ciruit board into body. You may have to rotate
the circuit board as you slide it in to get the LED
to slip into the hole in the front end and also to
align blink potentiometer with hole in side. Insert
white knob through sides of body into hole on
blink potentiometee .
PulsGuideJr
ON-OFF/Brightness:) Rotate black knob on
end clockwise to increase, Counter-clockwise to
click off.
LED Blink: Rotate the white knob knob nearest
eyepiece counterclockwise for pulse, clockwise
for faster pulse and continuous on.
Battery Installation: Uses one Duracel XL
DL1/3N lithium battery or equivalent. Pull white
blink knob out of side of body, grasp black
on/off knob and gently pull circuit board out.
Install new battery. Be careful of battery
polarity. Inserting battery with polarity
reversed will damage circuitry and void
warranty.
Remove anti-rattle foam from old battery and
press on new battery. Insert circuit board into
tube compressing anti-rattle foam and slide
ciruit board into body. You may have to rotate
the circuit board as you slide it in to get the LED
to slip into the hole in the front end and also to
align blink potentiometer with hole in side. Insert
white knob through sides of body into hole on
blink potentiometee .
PulsGuideJr
ON-OFF/Brightness:) Rotate black knob on
end clockwise to increase, Counter-clockwise to
click off.
LED Blink: Rotate the white knob knob nearest
eyepiece counterclockwise for pulse, clockwise
for faster pulse and continuous on.
Battery Installation: Uses one Duracel XL
DL1/3N lithium battery or equivalent. Pull white
blink knob out of side of body, grasp black
on/off knob and gently pull circuit board out.
Install new battery. Be careful of battery
polarity. Inserting battery with polarity
reversed will damage circuitry and void
warranty.
Remove anti-rattle foam from old battery and
press on new battery. Insert circuit board into
tube compressing anti-rattle foam and slide
ciruit board into body. You may have to rotate
the circuit board as you slide it in to get the LED
to slip into the hole in the front end and also to
align blink potentiometer with hole in side. Insert
white knob through sides of body into hole on
blink potentiometee .
PulsGuideJr
ON-OFF/Brightness:) Rotate black knob on
end clockwise to increase, Counter-clockwise to
click off.
LED Blink: Rotate the white knob knob nearest
eyepiece counterclockwise for pulse, clockwise
for faster pulse and continuous on.
Battery Installation: Uses one Duracel XL
DL1/3N lithium battery or equivalent. Pull white
blink knob out of side of body, grasp black
on/off knob and gently pull circuit board out.
Install new battery. Be careful of battery
polarity. Inserting battery with polarity
reversed will damage circuitry and void
warranty.
Remove anti-rattle foam from old battery and
press on new battery. Insert circuit board into
tube compressing anti-rattle foam and slide
ciruit board into body. You may have to rotate
the circuit board as you slide it in to get the LED
to slip into the hole in the front end and also to
align blink potentiometer with hole in side. Insert
white knob through sides of body into hole on
blink potentiometee .
PulsGuideJr
ON-OFF/Brightness:) Rotate black knob on
end clockwise to increase, Counter-clockwise to
click off.
LED Blink: Rotate the white knob knob nearest
eyepiece counterclockwise for pulse, clockwise
for faster pulse and continuous on.
Battery Installation: Uses one Duracel XL
DL1/3N lithium battery or equivalent. Pull white
blink knob out of side of body, grasp black
on/off knob and gently pull circuit board out.
Install new battery. Be careful of battery
polarity. Inserting battery with polarity
reversed will damage circuitry and void
warranty.
Remove anti-rattle foam from old battery and
press on new battery. Insert circuit board into
tube compressing anti-rattle foam and slide
ciruit board into body. You may have to rotate
the circuit board as you slide it in to get the LED
to slip into the hole in the front end and also to
align blink potentiometer with hole in side. Insert
white knob through sides of body into hole on
blink potentiometee .