Installation Guide

1-Place items like recovery gear, clothing, towels, rst aid

kits, road side equipment, snacks, etc. in the main com-

partment A. Place smaller items in the outer zippered

pocket B (Fig 1).

1-Position the bag so that it’s zipper pull holders are lo-

cated at the top of the bag (Fig 1).

3-Buckle the top strap around the roll bar, without twisting

the strap (Fig 3).

4-Stretch the bag along the roll bar and tighten both

straps (Fig 4).

Pack The Roll Bar Storage Bag

Attach The Roll Bar Storage Bag

The correct attachment of this product is critical and

beyond the control of Rightline Gear. The safe use

and long life of this product depends entirely on

your good judgment and following these directions.

Fig 4

Fig 2

5-Move the tri-glides towards the loose ends of the

straps (Fig 5).

2-Buckle the bottom strap around the roll bar, without

twisting the strap (Fig 2).

Fig 3

Fig 5

Fig 1

Pull

Holders

Tri-Glide

Roll Bar Storage Bag 100J70-B

Fits: Wrangler JK (2-door & 4-door), TJ, LJ, YJ, CJ

1 Year Manufacturer’s Limited Warranty

www.rightlinegear.com/product-warranty.html

CAUTION: Make sure that the seat belts can move

unrestricted before operating the vehicle.