430 GPS Navigator User Manual
WELCOME .......................................................................................................................8 ABOUT THIS MANUAL ....................................................................................................9 CUSTOMER SERVICE ................................................................................................... 10 ABOUT GPS NAVIGATION ........................................................................................... 11 GETTING STARTED ........
The Search Area Button ....................................................................................................................... 28 Changing the Search Area ................................................................................................................... 29 THE NEW DESTINATION BUTTON............................................................................... 30 Ways to Search for Destinations...............................................................................
THE SHOW MAP BUTTON ............................................................................................ 56 THE START NAVIGATION BUTTON ............................................................................. 58 Map in Preview Mode ........................................................................................................................... 59 Map in Navigation Mode ..................................................................................................................
View GPS Data ...................................................................................................................................... 86 Save Current Location ......................................................................................................................... 86 No GPS Reception ................................................................................................................................ 87 CUSTOMIZING YOUR UNIT .......................................
Music Player Buttons ......................................................................................................................... 114 MOVIE VIEWER ........................................................................................................... 115 MOVIE VIEWER Screen ...................................................................................................................... 116 Movie Player Buttons .........................................................................
Why does my unit only accept every other letter entered for an address? ........................................................................... 138 Why does my unit sometimes miss announcing the street name? ....................................................................................... 139 Why doesn’t the unit accept the street I am entering? Why can’t I find my address? ..........................................................
WELCOME INTRODUCING YOUR RIGHTWAY GPS NAVIGATOR 430 Welcome to the world of stress free driving. The RightWay 430 makes driving in new places a pleasant adventure. With over 1.7 million points of interest, turn-by-turn spoken directions – including the name of the street – and easy address entry, the RW 430 will get you where you are going. Caution! Do not operate the RW 430 GPS Navigator while driving. Park the vehicle safely first. Transplant GPS, Inc.
ABOUT THIS MANUAL SYMBOLS The following symbols refer to specific passages of text: Warnings. Instructions and tips for operation. LIABILITY RightWay GPS, its dealers, suppliers and distributors disclaim all liability for any use of this product in any way that may cause accidents, damage or that may violate the law.
CUSTOMER SERVICE We want your experience with the RW 430 GPS Navigator to be an enjoyable one. If you have any questions or problems, please contact our customer service team. ON-LINE www.RightWayGPS.com E-MAIL Customer Service service@rightwaygps.com Technical Support support@rightwaygps.com Accessories sales@rightwaygps.com Customers will receive a response within 2 business days. TELEPHONE Telephone: (507) 529-0041 Service Hours: Monday through Friday, 8:30 a.m. to 5 p.m.
ABOUT GPS NAVIGATION The Global Positioning System (GPS) is a space-based radio-navigation system. This system consists of 24 satellites, which orbit the Earth at an altitude of approximately 17,500 kilometers. Each of the 24 satellites is deployed in 6 orbital planes and circles the earth twice a day. These systems of satellites continuously transmit signals containing precise information, 24 hours a day in any weather condition, everywhere around the world.
GETTING STARTED WHAT‟S INCLUDED Your RightWay 430 GPS Navigator comes with the following accessories. If your box is incomplete, please notify us within 14 days of purchase.
RW 430 GPS NAVIGATOR HARDWARE Your RightWay 430 GPS Navigator is a sophisticated electronic device. To ensure a long lasting and trouble free experience, please take great care to avoid dropping or damaging the device.
Caution! Do not open the navigation device's casing under any circumstances. Caution! Protect the device from moisture. The device is not waterproof and is not protected against water damage. Caution! Do not expose the navigation device to extreme heat or cold. This may damage the device or impair its function. Caution! Use only the charger provided or one that has been approved by the manufacturer.
SAFETY INFORMATION NAVIGATION SAFETY INFORMATION Use this navigation system at your own risk. Caution! To prevent accidents, do not operate the navigation system while driving. Caution! Do not look at the display unless it is absolutely safe to do so! Caution! Traffic regulations have priority over any instructions from the navigation system.
RW 430 MOUNTING SYSTEM Included in your package, you will find a mounting solution to easily secure your RightWay Navigator to either the windshield or the dash. Caution! It is illegal in California and Minnesota to attach anything to the windshield. Caution! When using navigation aids in a vehicle, it is your sole responsibility to place, secure and use these aids in a manner that will not cause accidents, personal injury, property damage, or in any manner to obstruct your view.
BASIC OPERATIONS LOCK/UNLOCK SWITCH On the right side of the RW 430 Navigator is a Lock/Unlock switch. This feature is designed to prevent the unit from accidentally being turned on or off. The RW 430 will not turn ON when in the locked position. It must be in the unlocked position to turn on the unit. When in the unlocked position, all buttons and the touch screen are activated. When the unit is ON and in the locked position, all buttons and the touch screen are deactivated but all programs will run.
POWERING ON & OFF Turn ON Press and hold the power button for three seconds to turn ON the RightWay 430 GPS Navigator. The opening screen will appear indicating the programs are loading. When loaded, the PROGRAMS WINDOW will appear. SLEEP Mode To put the RW 430 in sleep mode, press and hold the power button until the screen says “sleeping.” To “wake” the unit from sleep mode, press the power button. Turn OFF To fully turn off the unit, press and hold the power button.
NAVIGATION To begin navigation, tap the „Navigation‟ button. A screen will appear asking if you have read the End User‟s License Agreement found at the end of this document. Tap „OK‟ and the main navigation window will open.
MAIN NAVIGATION WINDOW OVERVIEW The MAIN NAVIGATION WINDOW opens when the navigation software starts. You can reach all of the navigation software functions from this window. Tap the New Destination button to: • Select an address by city or street. • Select a POI as a destination. Tap the My Destinations button to select a destination from: • A list of destinations you have saved. • A list of the most recently entered destinations.
STATUS INDICATORS When the unit is on, in the upper right-hand corner you will find three icons. These symbols provide valuable information about your device. POWER ICON The Power symbol can display the following conditions of the built in battery: The device is powered by an external power source. The battery is charging. The device is powered by its internal battery. Battery is fully charged. The device is powered by its internal battery. Battery charge is sufficient.
GPS ICON In the upper right-hand corner of the display, the GPS symbol appears. Acquiring Satellites Data is being received from less than three satellites. Position cannot be calculated. GPS Ready Data is being received from at least three satellites. Position can be calculated. No Symbol The built-in GPS receiver is not operational. Please press the reset button. Contact customer service if the problem persists.
ENTERING INFORMATION MENUS Many buttons have menus which open when activated. To activate a menu, tap on the button with your finger or stylus. To close a menu without selecting a function, tap on the same button you used to open the menu. SOFTWARE KEYBOARDS Software keyboards appear on the screen when text entries are necessary. All entries can be made on the software keyboard using the fingertips or stylus. Three keyboards are available for entering destination information.
NUMERIC KEYBOARD Tap to display the numeric keyboard from another keyboard. SPECIAL CHARACTER/SYMBOL KEYBOARD Tap to display the special character keyboard. Note: After you have entered a special character, the alphabetic keyboard will appear automatically.
SPECIAL KEY Spacebar. Moves the cursor forward one space. Found on the alphabetic and numeric keyboards. Delete. Removes the previous character & moves the cursor back one space. Found on the alphabetic and numeric keyboards. Opens the numeric keyboard. Opens the alphabetic keyboard. Opens the special character keyboard. USING PREDICTIVE TEXT The RW 430 GPS Navigator has a predictive text feature to facilitate speedy address entry.
TIPS FOR USING PREDICTIVE TEXT To use predictive text most successfully, follow the suggestions: Pause after each letter or number is entered to allow the predictive text feature to work. Keep in mind that the number you entered may not be the first character that appears on the list. Example: You may enter “5” and CR-151 appears on the list. For streets with directions (i.e. South Main, 53rd Street NW), enter the street name without the directional portion (i.e. Main, 53rd Street).
4. A new list appears with possible matches. Madison Street is on the list. 5. To select Madison Street, either double click on Madison Street or highlight it and tap the checkmark.
SELECTING THE SEARCH AREA The maps preloaded on the RW 430 GPS Navigator cover a large area. If the unit had to list every city named Rochester in the United States and Canada it would take a very long time. To narrow down the search area, use the Search Area Button. THE SEARCH AREA BUTTON The Search Area button is used to select the map area to search, such as a state or province. When you enter a new destination for the very first time, the SEARCH AREA list opens.
CHANGING THE SEARCH AREA To select a Search Area that if different from the one currently shown: 1. Tap the Search Area button. The SEARCH AREA WINDOW opens. 2. Use the alphabetic keyboard to enter the area (i.e. state or province) you wish to search for your destination. 3. Either tap your selection on the list or highlight it and tap the checkmark. 4. The Search Area button displays the code for the newly selected destination area.
THE NEW DESTINATION BUTTON New destinations are destinations that you have not yet navigated to, or those that you have not yet stored. Destinations may be selected by entering an address, selecting a point of interest (POI), or selecting from the quick search function. Tap the New Destinations button to: • Enter an address by city or street. • Search and select POI as a destination. • Search & select POI by direct access.
WAYS TO SEARCH FOR DESTINATIONS There are three ways you can search for a destination: enter an address, select a POI, or select a destination from the quick search function. ENTER AN ADDRESS To find an address, specify: City First if you do not know the exact street address. Street First if you do not know the actual city. SEARCH FOR A POI Points of Interest (POIs) are useful addresses that are organized according to particular criteria.
ENTERING AN ADDRESS When searching for a location, you do not have to enter all of the address details. If you do not know the house number, leave the field blank to display the Intersection field. In this field, enter the name of a nearby side street and the navigation system calculates a route to the intersection of the specified streets. Additionally, if you only specify the: • City - a route is calculated to the town center.
STREET FIRST Entering a new destination using Street First is helpful when the exact city is unknown. For example, you want Grand Avenue but you do not know if it is in Minneapolis or St. Paul. In this case, entering the street first assists in determining the city. 1. From the MAIN NAVIGATION WINDOW, tap New Destination. A menu will appear with your options for entering your destination. 2. Tap Enter an Address. 3. Another menu appears. Tap Street First to open the ADDRESS WINDOW.
CITY FIRST The City First option of entering a destination is the fastest way to enter an address when all information is known. 1. In the MAIN NAVIGATION WINDOW, tap New Destination, then tap Enter an Address. 2. Tap City First to open the ADDRESS WINDOW. 6. Enter the name of the city or the postal code using the alphabetic keyboard. Tap (OK button) when complete. 7. Enter the name of the street. 8. Enter the house number. Tap 6. Tap the Start Navigation button. (OK button) when complete.
Note: If a street name is not entered, a route will be calculated to the city center. Note: If a house number is not entered, a route will be calculated to the center of the street. Note: To change information you have already entered, tap the category that needs to be changed, NOT the back button.
SELECTING A POINT OF INTEREST (POI) Points of Interest or POIs are useful addresses that are organized according to particular criteria. POIs include airports, restaurants, hotels, gas stations, government offices, banks, hospitals, shopping centers, etc. Icons representing the POIs can be displayed on the map.
SEARCH FOR POI NEARBY 1. In the MAIN NAVIGATION WINDOW, tap New Destination, and then tap Search for POI. 2. Tap Nearby. 3. A list of POI categories will appear. Use the list. (Up) and (Down) to scroll through 4. To accept a category from the list, tap on the entry. If a sub-category exists, specify a sub-category by tapping.
4. The Name of the Destination List opens. It contains the nearest POIs in the specified category, sorted by distance. Tap on the name of the desired destination. 5. Information about your selected POI opens. Tap the Start Navigation button. The map opens in Preview Mode. Note: GPS reception must be sufficient to determine your current position for the unit to search for a POI. You can see if GPS reception is sufficient by looking at the GPS icon in the upper right hand corner.
SEARCH FOR POI IN A CITY 1. In the MAIN NAVIGATION WINDOW, tap New Destination, and then tap Search for POI. 2. Tap in a City. 3. Enter the name or the postal code of the destination location. 4. Specify a category from which you would like to select a POI. Use (Up) and (Down) to scroll through the list. To accept a category from the list, tap on the entry. If a sub-category exists, specify a sub-category by tapping. 4. The Name of the Destination list opens.
6. Tap the Start Navigation button. The map opens in Preview Mode.
SEARCH FOR POI – NATIONWIDE 1. In the MAIN NAVIGATION WINDOW, tap New Destination, and then tap Search for POI. 2. Tap Nationwide. 3. The POI OF NATIONAL SIGNIFICANCE WINDOW opens. Tap on the name of the category from which you would like to select. 4. The name of the category list opens. It contains a list of national POIs, sorted by distance. Tap on the name of the desired destination. 5. Tap the Start Navigation button. The map opens in Preview Mode.
SEARCH FOR POIS ON THE MAP 1. In the MAIN NAVIGATION WINDOW, tap the Show Map button. 2. Tap (Destination search). 3. The map opens in Destination Search Mode. Tap on the point to which you wish to navigate. The destination that you have selected appears under the cross hairs 4. Tap (OK). The DESTINATION ON MAP WINDOW opens. Detailed address information for the selected destination displays in the upper left-hand corner. 5. Tap the Take Me There button.
SEARCH FOR POI NEAR A SELECTED LOCATION 1. In the MAIN NAVIGATION WINDOW, tap New Destination, then tap Enter an Address. 2. Tap City First to open the ADDRESS WINDOW. 3. Enter the name of the city or the postal code using the alphabetic keyboard. 4. Tap the Options Button. 5. The options menu appears. Tap the Search Nearby button. 6. A list of POI categories will appear. Use (Up) and (Down) to scroll through the list. To accept a category from the list, tap on the entry.
7. A list of POIs is returned sorted by distance from the location. Tap on a POI to view more information. Note: GPS reception is not required to search for a POI near a selected destination. DIRECT ACCESS POINTS OF INTEREST The Direct Access button allows you to quickly access frequently used POIs such as gas stations and restaurants. The Direct Access button is subdivided into three smaller buttons. The symbols for the POI categories selected for direct access can be seen on these smaller buttons.
USING THE DIRECT ACCESS BUTTONS 1. From the MAIN NAVIGATION WINDOW, tap New Destination. A menu will appear with your options for entering your destination. 2. The Direct Access button is the third button. Icons on this button represent the three POI categories designated for quick access. Tap the category from which you would like to select a POI. 3. The destination category list opens. It contains the nearest POIs in the specified category, sorted by distance. 4. Tap on the desired destination.
SPECIFYING DIRECT ACCESS POI CATEGORIES 1. In the MAIN NAVIGATION WINDOW, tap Options, and then tap Settings. 2. Tap POI. 3. In the Direct Access 1 field, tap (List) and select a POI category. 4. Repeat the above step in the Direct Access 2 and Direct Access 3 fields. 5. When finished, tap Done to save the changes.
MY DESTINATIONS The My Destination button is used to select favorite destinations, frequently used destinations and/or destinations recently entered. Every destination that you enter, as well as the destinations from the LAST DESTINATIONS list, can be saved to the FAVORITES list. This is useful if you often navigate to a particular destination. Tap the My Destinations button to select a destination from: • A list of favorite destinations you have saved.
FAVORITES Destinations to which you often travel can be saved on the FAVORITES list so you only have to enter the address once. The RightWay 430 GPS Navigator can save up to 300 different destinations on your FAVORITES list. SAVING TO FAVORITES There are three ways to save a destination to FAVORITES: save while entering an address, save after an address has been entered or save from your current location. WHILE ENTERING A DESTINATION 1. Enter a destination. Do not tap the Start Navigation button! 2.
AFTER ENTERING AN ADDRESS 1. From the MAIN NAVIGATION WINDOW, tap My Destinations, and then tap Last Destinations. 2. A list of destinations you have previously navigated to will appear. Tap on the destination to add to your FAVORITES LIST. Do not tap the Start Navigation button! 3. Tap the Options button. 4. The options menu will appear. Tap the Save as Favorite button. 5. The SAVE DESTINATION AS... WINDOW opens.
FROM THE YOUR CURRENT LOCATION 1. From the MAIN WINDOW, tap Options, and then tap GPS Status. 2. The GPS SETTINGS WINDOW will appear. Tap the Save Position button. 3. The SAVE DESTINATION AS... WINDOW opens. Enter the name you would like the destination saved under and indicate whether it is a home address. 4. Tap Save. The destination will be added to the Favorites List under the name you entered. SELECTING A DESTINATION FROM THE FAVORITES LIST 1.
MODIFYING YOUR FAVORITES LIST RENAME DESTINATION 1. In the MAIN NAVIGATION WINDOW, tap My Destinations, and then tap Favorites. 2. Your FAVORITE LIST will appear. Use (Up) and (Down) to scroll through the list. Tap the name of the destination to which you would like to rename. 3. Tap Options button, then tap Rename button. 4. Enter the name you would like the destination saved under and indicate whether it is a home address. 5. Tap Save.
DELETE A FAVORITE DESTINATION 1. In the MAIN NAVIGATION WINDOW, tap My Destinations, and then tap Favorites. 2. Your FAVORITE LIST will appear. Use (Up) and (Down) to scroll through the list. Tap the name of the destination to which you would like to delete. 3. Tap Options, and then tap Delete Destination. 4. The screen will say, “Do you really want to delete this destination?” Tap the Yes button. 5. The entry is removed from the FAVORITES LIST. ADD A FAVORITE TO ROUTE 1.
LAST DESTINATIONS The RightWay Navigator saves the last 30 destinations to which you have navigated in the Last Destinations list. You may select a destination from the Last Destinations list or add a destination to your favorites. SELECTING A DESTINATION FROM THE LAST DESTINATIONS LIST 1. In the MAIN NAVIGATION WINDOW, tap My Destinations, and then tap Last Destinations. 2. A list of your LAST DESTINATIONS appears. Use (Up) and (Down) to scroll through the list.
THE TAKE ME HOME BUTTON The Take Me Home button enables you to route to your home address with the touch of a button. Only one destination from the Favorites list can be defined as your home address. Tap the Take Me Home button to: Immediately route from your current position to your home address. Note: If your home address has not previously been specified on your FAVORITES LIST, when you tap Take Me Home, you will be prompted to enter your home address.
DESIGNATING A HOME ADDRESS 1. In the MAIN NAVIGATION WINDOW, tap the Take Me Home button. 2. A message saying you haven‟t entered a home address appears. Tap the OK button. 3. The HOME ADDRESS WINDOW opens. Enter your home address, then tap the Home Address button. 4. The selected destination is saved as your home address. On the Favorites list, a house icon is shown next to your home address.
THE SHOW MAP BUTTON Tap the Show Map button to: Show your exact location on a map. Select a destination using the map.
SELECTING A DESTINATION USING THE MAP 1. In the MAIN NAVIGATION WINDOW, tap the Show Map button. 2. Tap (Destination search). 3. The map opens in Destination Search Mode. Tap on the point to which you wish to navigate. The destination that you have selected appears under the cross hairs 4. Tap (OK). The DESTINATION ON MAP WINDOW opens. Detailed address information for the selected destination displays in the upper left-hand corner. 5. Tap the Take Me There button.
THE START NAVIGATION BUTTON Tap the Start Navigation button to: View map in Preview Mode View map in Navigation Mode View map in Destination Search Mode Show Turn-by-Turn List of directions
MAP IN PREVIEW MODE In the Preview Mode, the entire route is visible with a small flag marking the destination. The route and the estimated travel time are also displayed. The map opens in Preview Mode after a destination or route has been entered and the Start Navigation button has been tapped or when the Show Route button has been tapped for a route. 1 2 3 4 1 An orange triangle shows your current position.
MAP IN NAVIGATION MODE Tap Start Navigation to view the map in Navigation Mode. When operating in Navigation Mode, the direction you are traveling is at the top. 2 3 4 4 11 5 10 6 9 7 8 1 Sign postings to be followed are displayed here. 2 The route is marked in orange. 3 A triangle in orange shows your current position on the map. The map area displayed continually changes so that your current position is always centered on the map.
to the junction, a spot diagram, rather than the distance, is shown. The nearer you get to the junction, the more yellow spots are displayed. (See below.) If you don't have to change direction for a longer period, you see only a forward facing arrow. The distance you travel on the road you are on is displayed beneath the arrow. Note: Tap the large arrow field to hear current route instructions repeated.
MAP MODIFICATIONS IN NAVIGATION MODE When the map is open in Navigation Mode, tap any point on the map to bring up map modification buttons. 2D/3D Tap this button to change between 2D and 3D map view. The symbol for the mode that is currently set is marked orange. DAY/NIGHT Tap this button to changes between "day" and "night" display colors to reduce eye strain. The symbol for the mode that is currently set is marked orange.
BLOCK Tap this button to block a section of the route and create an alternate path. This is useful for avoiding navigating around traffic jams and road construction. POI ON YOUR ROUTE Tap this button to display POIs on your route. This enables you to find out, for example, how far it is to the nearest services. A destination shown here can be added as an interim destination by tapping (Interim Destination) to the right of its entry in the list.
MAP IN DESTINATION SEARCH MODE From either Preview Mode or Navigation Mode, tap (Destination search) to activate the Destination Search Mode. In this mode, the map‟s orientation does not change; north is always at the top of the screen. A pair of cross hairs can be seen when the map is in Destination Search Mode.
DESTINATION SEARCH TOOLS Zoom Out Use Zoom Out to display a larger section of the map with fewer details. Zoom In Use Zoom In to display a smaller section of the map in greater detail. Zoom Mode When this mode is active, you can plot a map section with your finger. Plot the map section from upper left to bottom right and it zooms in to fit the size of the screen. Plot the map section from bottom right to top left, and the map zooms out.
OPERATING IN DESTINATION SEARCH MODE 1. From either Preview Mode or Navigation Mode, tap (Destination search). 2. The screen changes to DESTINATION SEARCH MODE and displays two cross hairs. Tap on the point to which you wish to navigate. The destination that you have selected appears under the cross hairs. 3. Tap (OK). 4. Buttons with various functions appear. Tap on a button to activate its function.
DESTINATION SEARCH MODE BUTTONS Information Detailed address information for the selected destination displays in the upper left-hand corner. Tap for more information about the POI. Take Me There Immediately begins navigation to that location. If you are currently navigating to another destination, it cancels that route and creates a new route to the selected point. Interim Destination Sets the selected point as an interim destination.
TO EXIT DESTINATION SEARCH MODE Tap (Destination search) to exit the Destination Search Mode and return to the window from which you started this mode. TO RETURN TO THE MAIN NAVIGATION WINDOW Tap (Back) to return to the MAIN NAVIGATION WINDOW. If you are currently navigating, you are prompted to confirm your decision to quit navigation.
THE TURN-BY-TURN LIST BUTTON From the Map Preview Mode, tap the Show Turn-by-Turn List button to view detailed directions of the calculated route before starting navigation or at any time during navigation. The list displays all of the driving instructions in table form. TO VIEW TURN-BY-TURN LIST FROM PREVIEW MODE 1. Tap the Show turn-by-Turn List button. 2. The TURN-BY-TURN LIST WINDOW opens displaying the driving instructions calculated for your entire route. 3.
THE TURN-BY-TURN WINDOW 1 Distance to the junction. 2 Schematic depiction of the next junction where you must turn. 3 Name of the street onto which you must turn. 4 Indicates whether you want to travel on the section of the route. (Allow) Include this section in the route. (Forbid) Exclude this section from the route.
BLOCKING ROUTE SECTIONS 1. In the TURN-BY-TURN LIST WINDOW, tap on the route section you do not want to travel. The (Forbid) symbol will appear next to it. 2. Tap (Modify Route). 3. The navigation system calculates an alternative route avoiding the designated route sections selected. New driving instructions are displayed in the TURN-BY-TURN LIST WINDOW. REMOVING BLOCKS & USING ORIGINAL ROUTES Section blocks can be removed at anytime.
THE OPTIONS BUTTON The Options button allows you to customize your RW 430 GPS Navigator to meet your specific needs and personal preferences. Tap the Options button to: A. Access the Route Planning: • Create a route. • Save a route. • Load a saved route. • Run a simulation of a route. B. Go to the GPS Status: • View current GPS status and location information. • Save the current location as a destination (GPS reception required). C. Access the Settings: • Basic Settings.
GENERAL ROUTING INFORMATION STARTING POINT The starting point of a route is the point at which you want to begin your trip. This does not need to be your current location. For example, if you are planning a route for a vacation, your hotel could be entered as the starting point. Note: The starting point is only important if you want to see a planned route on the map and are not at the planned starting point or do not currently have GPS reception.
ROUTE PLANNING CREATING A ROUTE 1. In the MAIN WINDOW, tap Options button, then tap Route Planning button. 2. The ROUTE PLANNING WINDOW opens. Tap Specify Starting Point button. 3. The STARTING POINT menu opens. Tap the button corresponding to the how you wish you enter your starting point. 4. Enter the starting point. The selected destination appears next to the flow number “0”, indicating that it is the Starting Point of the route.
5. Tap the Add Route Point button. The ROUTE POINT menu opens. Tap the button corresponding to how you wish you enter your destination. 6. Enter the route point, and then tap the Add button. The selected destination appears next to the flow number “1”, indicating that it is the first stage of the route. 7. Repeat steps 5 & 6 for each additional destination that you want to add to the route. 8. Tap Show Route button after all route points have been added.
CHANGING THE STARTING POINT OF A ROUTE 1. In the ROUTE PLANNING WINDOW, tap flow number “0” (the starting point). 2. The STARTING POINT menu opens. Tap the button corresponding to how you wish to enter your new starting point. 3. Enter the new starting point. The selected destination appears next to the flow number “0”, indicating that it is the new Starting Point of the route.
CHANGING THE ORDER OF ROUTE POINTS 1. In the ROUTE PLANNING WINDOW, tap the route point you want to change. 2. A menu will appear with route management options: Route Point Up Moves the selected route point up one stage. Example: Route Point 2 becomes Route Point 1 Route Point Down Moves the selected route point down one stage. Example: Route Point 2 becomes Route Point 3 3. Tap the button corresponding to the change you would like to make. The route point changes will be made. 4.
DELETING A ROUTE POINT 1. In the ROUTE PLANNING WINDOW, tap the route point you want to change. Note: The starting point (flow number “0”) cannot be moved or deleted. 2. A menu appears with the following route management options: 3. Tap (delete). 4. A screen will appear asking, “Do you really want to delete this interim destination?” Tap Yes. 5. The route point will be deleted and the flow numbers of the route adjust accordingly.
SAVING ROUTES 1. In the ROUTE PLANNING WINDOW, tap Options. 2. A menu will appear. Tap Save Route. 3. Using the alphabetic keyboard, enter a name for the route. Tap Save. 4. The route is saved to the SAVED ROUTES list under the name you entered. Note: Only the start point and route points are saved. The calculated route is not. If you load a route that has been saved, it must be recalculated before navigation can begin.
USING SAVED ROUTES 1. In the ROUTE PLANNING WINDOW, tap Options. 2. A menu will appear. Tap the Saved Routes button. 3. The SAVED ROUTES list will appear. Tap the route you would like to select. 4. Tap the Load Route button. The ROUTE PLANNING WINDOW displays the starting point and the route points of the selected route 5. Tap the Show Route button. The map opens in Preview Mode. Note: Only the start point and route points are saved. The calculated route is not.
SHOW ROUTE 1. In the ROUTE PLANNING WINDOW, after either loading a saved route or entering your route points, tap Show Route button. 2. The map opens in Preview Mode. The starting point and the route points are marked by flags. For each stage, the distance and the estimated trip time is given. This information is also displayed for the entire route. 3. After the route is calculated, you can show the route Turn-by-Turn, Start Navigation, or view a simulation of the route.
RUN A SIMULATION OF A ROUTE 1. In the ROUTE PLANNING WINDOW, after either loading a saved route or entering your route points, tap Show Route button. 2. The map opens in Preview Mode. Tap Options. 3. A menu will appear. Tap Simulation. 4. The route is calculated and a simulation of the route is seen and heard. Note: GPS signal reception is not required for simulation. Note: Simulations are restricted to routes of a maximum of 90 miles.
VIEWING ROUTE PROFILE The calculation of a route is based on route options which are found in the Route Profile. The Route Profile settings can be modified to meet your specifications. 1. In the ROUTE PLANNING WINDOW, after either loading a saved route or entering one route point, tap Show Route button. 2. The map opens in Preview Mode. Tap Options. 3. A menu will appear. Tap Route Profile. 4. The first page of the ROUTE PROFILE WINDOW will appear. There are 2 pages of route profile options.
4. Each setting also has either a (toggle) button or a (list) button. Tap (toggle) to alternate between two or three different values. The selected value will be in white. Tap (List) to view a list of available choices for the setting. From the list, tap your selection, and then tap OK. 5. Tap the Done button to save changes you have made and return to Map Preview Mode. Tap the Cancel button to discard any changes you have made and return to the Map Preview Mode.
GPS STATUS GPS Status provides an overview of the data received by the GPS via satellite that the navigation software uses in calculating routes. Tap the GPS Status button to: View GPS data (longitude, latitude, altitude, etc.
VIEW GPS DATA 1. From the MAIN WINDOW, tap Options, and then tap GPS Status. 2. The GPS SETTINGS WINDOW will appear. From this window you can determine: GMT (Greenwich Mean Time) Longitude Latitude Altitude Direction traveling Satellites (need 3 to navigate) HDOP (measure of accuracy of the GPS receiver) Speed currently traveling SAVE CURRENT LOCATION 1. From the MAIN WINDOW, tap Options, and then tap GPS Status. 2. The GPS SETTINGS WINDOW will appear. Tap the Save Position button. 3.
NO GPS RECEPTION When GPS signal is interrupted, the following screen appears: When this message appears, you have the following options: Wait for reception. When GPS reception is sufficient for determining position, the route will be automatically recalculated and you can begin navigation. Tap the Cancel button. The MAIN WINDOW will open and your destination is saved in the LAST DESTINATIONS list.
CUSTOMIZING YOUR UNIT The RightWay 430 Navigator allows users to customize their unit to fit their specific needs though the Options Menu, which includes basic settings, POIs, the current map and the route profile. These screens contain a lot of information and appear very busy, but are easy to navigate once you understand how they are organized.
MOVING BETWEEN PAGES When there is more than one page of options to choose from, tap and (previous page) (next page) to move between the pages. VIEWING INFORMATION ABOUT A SETTING 1. Tap the 2. (Information) button. A precise explanation of the corresponding setting appears on the screen. 3. Tap OK to return to the settings screen.
VIEWING A LIST OF OPTIONS FOR A SETTING Some settings have several values from which to choose. To view a list of options for a setting: 1. Tap (List) in the category you wish to see the options for. 2. A list of choices for the setting will appear. The current setting will have an orange button next to it. From the list, tap your selection, and then tap OK. 3. The list closes and your new selection will be is displayed.
SAVING YOUR CHANGES After changing an option, tap the Done button to save your changes. Note: Once options are changed, they remain in effect for all subsequent navigation! CANCELING YOUR CHANGES Tap the Cancel button at any time to discard the changes you have made and return to the SETTINGS WINDOW.
BASIC SETTINGS SETTING WHICH CAN BE CHANGED The following is a list of settings which can be modified.
CHANGING BASIC SETTINGS 1. From the MAIN NAVIGATION WINDOW, tap Options, Settings, and then tap Basic Settings. 2. The first page of the BASIC SETTINGS WINDOW will appear. There are 6 pages of basic settings. To move between pages tap (previous page) and (next page). 3. For each setting there is an (Help) button. When you tap it, you see a precise explanation of the corresponding setting. 4. Each setting also has either a (toggle) button or a (list) button.
BASIC SETTINGS & THEIR OPTIONS Page 1 of 6 Setting Category Language Options English Default English Spanish French Speak Street Names Yes Speak street names No 2D Zoom Factor No Automatic Zoom Standard Smaller Map Section Standard Larger Map Section 3D Map: Show Street Names Yes No Yes
Page 2 of 6 Setting Category 2D Map: Show Street Names Options Yes Default Yes No 2D Map: Orientation Always North In Direction of Travel In Direction of Travel Show Altitude and Speed Yes – show altitude & speed Display Compass Yes – display compass Yes No – do not show altitude & speed No – do not display compass No
Page 3 of 6 Setting Category Show Remaining Options Yes – show remaining distance to destination and, if applicable, interim destinations Default Yes Distance No – do not show remaining distance Show Duration of Journey Yes – show remaining travel time to destination and, if applicable, interim destinations No No – do not show remaining travel time Show Time of Arrival Yes – show arrival time at destination Info When Crossing Borders Yes – display local speed restrictions when crossing a nation
Page 4 of 6 Setting Category Show Speed Limits Options Yes – always show speed limit Default Yes Only if exceeding – show speed limit only when exceeding speed limit No – do not show speed limit Warnings Within Urban Areas Warnings Outside Urban Areas Warn Against Certain Speed Limits Do not warn 10 mph too fast 5 mph too fast 15 mph too fast Do not warn 10 mph too fast 5 mph too fast 15 mph too fast Yes – warn of speed restrictions that apply in special circumstances (rain, snow, certain ti
Page 5 of 6 Setting Category Menu Animation Options Yes – menus are animated Default Setting Yes No – menus pop up Distance Units Kilometers Miles Miles Time Format 24h – military time 12h (am/pm) 12h (am/pm) Coordinate Display Yes No Yes
Page 6 of 6 Setting Category Coordinate Format Options Decimal coordinates (e.g. 16,5425°) Coordinates in minutes & seconds (e.g. 16°32‟33‟‟‟) Brightness Day Degree of brightness for the display in the “day” mode. Default Minutes & Seconds (e.g. 16°32‟33‟‟‟) 8 boxes 1 box (dim) 8 boxes (most bright) Brightness Night Degree of brightness for the display in the “night” mode. 3 boxes 1 box (dim) 8 boxes (most bright) Speed-Dependent Volume Volume automatically increases as your speed increases.
CURRENT MAP SETTING The RightWay 430 GPS Navigator comes with maps allowing you to navigate in the United States, Canada, Puerto Rico and the U.S. Virgin Islands. The default setting is the USA & Canada map. If you are navigating in Alaska, Hawaii, Puerto Rico or the U.S. Virgin Islands you will need to change the current map. CHANGING MAPS 1. From the MAIN NAVIGATION WINDOW, tap Options, and then tap Current Map. 2. The CURRENT MAP WINDOW will appear displaying the map currently being used.
3. A list of available maps is shown with a small button next to each. The orange button indicates the current map selection. Tap the map you would like to switch to. 4. The orange button should switch to the map you tapped. When the correct map has the orange button next to it, tap OK. 5. The CURRENT MAP WINDOW will appear displaying the new map selection. Tap the Done button to begin using the maps for navigation.
POI SETTINGS The RightWay 430 GPS Navigator has over 1.7 million POIs (points-of-interest) available for your use. The POI setting button enables you to select the POI categories to be shown on the map as well as designate POI categories to be used for direct access.
SELECTING POI CATEGORIES SHOWN ON MAP 1. From the MAIN NAVIGATION WINDOW, tap Options, then tap Settings, then tap POI. 2. The POI SETTINGS WINDOW will appear. Tap Categories Shown. 3. A list of POI categories is shown with a box next to each. Boxes with checkmarks are the categories selected to be shown on the map. Boxes without checkmarks are categories that will not be shown on the map. Check or uncheck boxes by tapping the category. Use (Down) to scroll through the list. (Up) and 4.
SELECTING DIRECT ACCESS POIS 1. From the MAIN NAVIGATION WINDOW, tap Options, then tap Settings, then tap POI. 2. The POI SETTINGS WINDOW will appear. Tap Direct Access 1. 3. A list of POI categories is shown with a small button next to each category. The orange button indicates the POI selected for direct access. Use (Up) and (Down) to scroll through the list. Tap the category you would like to designate as one of the three quick access buttons. 4.
ROUTE PROFILE SETTINGS Route Profile Settings Which Can Be Changed Calculate the Next Stage Ferries Highways Speed Profile Toll Roads Type of Route U-Turns
CHANGING ROUTE PROFILE OPTIONS 1. From the MAIN NAVIGATION WINDOW, tap Options, and then tap Settings. 2. Tap Route Profile. The first page of the ROUTE PROFILE WINDOW will appear. There are 2 pages of route profile options. To move between pages tap (previous page) and (next page). 3. For each setting there is an (Help) button. When you tap it, you see a precise explanation of the corresponding setting. 4. Each setting has a (toggle) button to alternate between two or three different values.
ROUTE PROFILE SETTINGS & THEIR OPTIONS Page 1of 2 Category Speed Profile Options Type of transportation being used. Important for calculating route & arrival times.
Page 2 of 2 Category Ferries Options Allow – can be used Default Allow Avoid – only use if there is no other option Forbid – cannot be used Calculate the Next Stage Automatically This setting only applies if you are navigating a route with several stages. Determine how, after reaching a certain route point, the next stage should be calculated. Automatically Automatically On request U-turns Not following a navigation instruction may result in the route being recalculated.
BONUS PROGRAMS In addition to superior GPS navigation, the RightWay 430 GPS Navigator allows users to listen to music, watch movies, read e-books, and view photos stored on a memory card. The following sections will provide information on using the bonus programs and the features available.
MEMORY CARD The music, books, videos, and/or pictures used with these programs need to be stored on a storage or memory card (i.e. SD card). A memory card is not included with the RW 430 GPS Navigator package. SD cards may be purchased at most stores carrying electronic devices and come in a wide range of capacity. Please follow the directions that come with your card for saving items to an SD card. INSERTING A MEMORY CARD 1. Locate the notched end of the memory card.
REMOVING A MEMORY CARD 1. To safely remove the memory card, exit out of any files being used from the memory card. 2. Gently press the memory card into the device until the lock disengages and the card pops out slightly. 3. Grabbing the edge of the card, carefully slide the memory card out of the unit and store in a safe place. Caution! Removing the memory card while using it may corrupt the files contained on the card.
MUSIC PLAYER The RightWay 430 Navigator allows users to listen to music. It can play MP3, WMA, and PCM files. 1. Copy the desired music files to a memory card. 2. Insert the memory card into the unit. 3. Tap the Music button to open the music menu 4. The MUSIC PLAYER screen will briefly open, then switch to the window showing the NANDFlash and the memory card. Either double click on the memory card or highlight the storage card and tap the checkmark to open the file. 5.
MUSIC PLAYER SCREEN Action Indicator (Play or Pause) Length of Selection Played Mute Indicator Total Length of Selection Mode of Play Indicator (Shuffle or Loop) Name of Selection
MUSIC PLAYER BUTTONS List Music* Loop/ Shuffle Volume Previous Song Next Song Pause/ Play Mute *When you tap the Open List button, three additional buttons appear on the screen.
MOVIE VIEWER The RightWay 340 Navigator allows users to watch movies and videos. It can play MP4, ASF, WMV, AVI, and DIVX files. 1. Copy the movie and/or video file you wish to view to a memory card. 2. Insert the memory card into the unit. 3. Tap the Movie button to open the movie menu. 4. The MOVIE VIEWER screen will briefly open, then switch to the window showing the NANDFlash and the memory card.
MOVIE VIEWER SCREEN Name of Movie Video Progress Minutes of Movie Viewed & Total Length of Movie
MOVIE PLAYER BUTTONS Full Screen Close Previous Movie Mute Increase Volume Pause Next Movie Decrease Volume List Movies* *When you tap the List Movie button, three additional buttons will appear on the screen.
E-BOOK READER The RightWay 430 Navigator allows users to read TXT files on their device. 1. Copy the TXT file for the book you would like to read to a memory card. 2. Insert the memory card into the unit. 3. Tap the E-Book button to open the E-BOOK READER screen. 4. Tap the Add Book button. 5. A window will open showing the NANDFlash and the memory card. Either double click on the memory card or highlight it and tap the checkmark to open the file. 6.
E-BOOK READER SCREEN Title of Book Current Page Number Total Number of Pages E-BOOK READER BUTTONS Close Scroll Up Scroll Down Jump* Add Book *When you tap the Jump button, a new screen will open enabling you to “jump” to any page in the book.
USING THE JUMP BUTTON 1. Tap the Jump button. 2. The PAGE NUMBER WINDOW opens. Use the number buttons to tap in the page number you want to go to, then tap the Enter button. Back Space Page Number Enter 3. The E-BOOK READER screen appears displaying the page corresponding to the number you entered.
PHOTO VIEWER The RightWay 430 Navigator can be used to view photos in BMP, JPG, GIF, and PNG formats 1. Copy the photo files for the pictures you would like to view to a memory card. 2. Insert the memory card into the unit. 3. Tap the Photo button to open the PHOTO VIEWER screen. b. Tap the Add Photo button. c. A window will open showing the NANDFlash and the memory card. Either double click on the memory card or highlight it and tap the checkmark to open the file. d.
e. The image will open on the PHOTO VIEWER screen.
SETTINGS MENU The RightWay Navigator allows users to make changes to various settings on their device. Each will be described in greater detail on the following pages. Tap the Close button at any time to return to the Programs Window.
NAVIGATION SETUP The Navigation Setup button tells the RightWay 430 Navigator the path and file name of the navigation software. The device is programmed to the proper settings for navigation.
TOUCH SCREEN CALIBRATION The Emend Touch Screen button enables you to re-calibrate your touch screen. RE-CALIBRATING THE TOUCH SCREEN 1. Tap Settings, then the emerald T-Scr button. 2. A white screen will appear with a + in the center. Tap the center of the + with either the stylus or your finger. 3. A new + will appear in a corner, again tap in the center of the +. 4. Repeat the process until the word OK appears on the screen indicating the screen has been recalibrated.
LANGUAGE The RightWay 430 GPS Navigator can be viewed in 18 different languages, enabling you to chose the language which works best for you. CHANGING LANGUAGE USED 1. Tap Settings, then the Language button. 2. The language screen will appear. Use the arrows to scroll up and down to view the list of languages available. Highlight the language you want use, then tap the close button. 3. The screen opens featuring the chosen language.
VOLUME The volume feature enables you to adjust the volume of the unit and the touch tone. CHANGING THE VOLUME 1. Tap the Settings button, then the Volume button to open the volume screen. 2. Tap + to make the volume louder or – to make the volume softer. 3. When the volume is at your desired level, tap the Close button. Softer Louder Close Mute Button Touch Tone Volume Options Note: There is also a volume adjustment dial on the left side of the unit.
GPS STATUS The GPS Status button enables you to view information about the GPS, its function and your current location. VIEWING THE GPS STATUS MENU 1. Tap Settings, then the GPS Status button. 2. The GPS Status window opens showing the number and strength of the satellite signals. Tap the T button. 3. The full GPS STATUS MENU screen appears. Tap the button next to the type of information or action you would like.
RESET THE GPS If you are having trouble acquiring a GPS fix, sometimes it is helpful to reset the GPS and have it begin searching for satellites again. Tap the T button next to the words „GPS Reset‟ to reset the GPS. GPS DATA FROM SATELLITE Tap the satellite icon to bring up the GPS DATA screen. This shows the NMEA message being received from the satellites. The GPS receiver then translated this message into usable information.
GPS SIGNAL Tap the bar graph icon to view the GPS SIGNAL screen. This screen shows how many satellites you are currently receiving information from. The GPS receiver needs information from at least three satellites to acquire a fix. LONGITUDE, LATITUDE, ALTITUDE & UTC Tap the grid icon to see your current longitude, latitude and altitude. It also shows the UTC or Universal Time Code. which is another way of saying Greenwich Mean Time.
BACKLIGHT The backlight feature enables you to adjust the brightness of the screen and designate the length of time to wait before shutting down the back light. CHANGING THE BRIGHTNESS OF THE SCREEN 1. Tap the Settings button, then the Backlight button to open the backlight screen. 2. Tap + to make the screen brighter or – to make the screen darker. 3. When the screen is the brightness you want, tap the Close button.
CHANGING THE BACKLIGHT SHUT DOWN TIME 1. Tap the Settings button, then the Backlight button to open the backlight screen. 2. Scroll up and down to find the option that suits your needs best. Highlight that option, and then tap the Close button.
POWER The Power button allows you to adjust the length of the stand-by time to meet your needs. Simply highlight your choice and tap the close button. CHANGING THE STAND-BY TIME 1. Tap the Settings button, then the Power button to open the power source screen. 2. Scroll up and down to find the option that suits your needs best. Highlight that option, and then tap the Close button.
TIME The Time button enables you to modify the date, time, or time zone displayed by your unit. CHANGING THE TIME OR TIME ZONE 1. Tap the Settings button, then the Time button to open the Time & Date screen. 2. Use the up and down arrows to scroll through the date and time options. Use the right and left arrows to scroll through the time zone options. 3. When the screen displays the desired date, time and/or time zone, tap the Close button.
Note: The time is displayed in military time. In military time, the hours are numbered from 00 – 24 instead of 12 hours AM and 12 hours PM. Using the military time system, any number smaller than 12 is AM while any number larger than 12 is PM. So 01 would be 1 AM and 13 would be 1 PM. The minutes are the same as regular time. To convert military time to regular time, subtract 12 from any number over 12. If the time reads 18:40, that means it is 6:40 PM.
SYSTEM The System button enables you to view information specific to your unit, such as the ID number and availability of memory. When you tap the System button, the following screen will appear. Note: Tapping „Initial Setup‟ will cause a factory reset, losing any information or settings you have made.
SKIN Skin refers to the background color(s) of the unit. There are two choices for the skin color: black or light green. Light green is the default setting. CHANGING THE COLOR SCHEME 1. Tap the Settings button, then the Skin button to open the Skin screen. 2. Highlight your choice of skin, and then tap the Close button. 3. The screen opens in the selected skin.
FREQUENTLY ASKED QUESTIONS WHY WON‟T MY UNIT TURN ON? The power button must be held down for 3 seconds for the unit to turn on. Typically the problem when a unit will not turn on is that it is locked. Check the lock/unlock switch on the right side of the device. It must be in the unlocked position. If that isn‟t the problem, check the power.
WHY DOES MY UNIT SOMETIMES MISS ANNOUNCING THE STREET NAME? When one turn immediately follows another, the name of the second street is not announced. This is to ensure you have the information needed to make the correct turn. WHY DOESN‟T THE UNIT ACCEPT THE STREET I AM ENTERING? WHY CAN‟T I FIND MY ADDRESS? Most often when this occurs, you are in the wrong search area. The address screen assumes the search area is the same as the previous address entry.
TECHNICAL SPCIFICATIONS Dimensions 5” × 3¼” × ¾” Weight 8 oz. Operating conditions: Operating temperature Storage temperature Humidity -10°C to +45°C -20°C to +70°C 0% to 90%, non-precipitating CPU Samsung ARM9 400 MHz processor Operating System Microsoft Windows® CE Net 5.0 Display 4.
END USER’S LICENSE AGREEMENT DO NOT OPERATE THIS PRODUCT WHILE DRIVING. PARK THE VEHICLE SAFELY FIRST. RIGHTWAY GPS, ITS DEALERS, SUPPLIERS AND DISTRIBUTORS DISCLAIM ALL LIABILITY FOR ANY USE OF THIS PRODUCT IN A WAY THAT MAY CAUSE ACCIDENTS, DAMAGE OR THAT MAY VIOLATE THE LAW. RIGHTWAY GPS, ITS DEALERS, SUPPLIERS, DISTRIBUTORS DISCLAIM ALL LIABILITY FOR ANY USE OF THIS PRODUCT IN DELIVERING MEDICAL AID, TRANSPORTING OF MEDICAL PATIENTS AND/OR EQUIPMENT, OR TRANSPORTING MEDICAL EMERGENCY VICTIMS.
TRANSPLANT GPS, INC. LIMITED WARRANTY Hardware: Transplant GPS, Inc. warrants to the original end user (i.e. Customer) that this product will be free from defects in workmanship and materials, for one year from the date of original purchase from Transplant GPS, Inc. The provisions of this warranty shall not apply if, in Transplant GPS, Inc.
EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT OR MALFUNCTION IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER‟S OR ANY THIRD PERSON‟S MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, 25 UNAUTHORIZED ATTEMPTS TO OPEN, REPAIR, OR MODIFY THE PRODUCT, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OTHER HAZARDS, OR ACTS OF GOD. THIS WARRANTY DOES NOT COVER PHYSICAL DAMAGE TO THE SURFACE OF THE PRODUCT, INCLUDING CRACKS OR SCRATCHES ON OUTSIDE CASING.
