User`s guide

Chapter 5 Specifications RIGOL
DG1000Z User’s Guide 5-1
Chapter 5 Specifications
Unless otherwise specified, all specifications can be guaranteed if the following two
conditions are met.
 The generator is within the calibration period and has performed self-calibration.
 The generator has been working continuously for at least 30 minutes under the
specified temperature (18℃~28℃).
All the specifications are guaranteed unless those marked with “typical”.
Model
DG1032Z
DG1062Z
Channel 2 2
Maximum Frequency 30MHz 60MHz
Sample Rate
200MSa/s
Waveforms
Basic waveforms Sine, Square, Ramp, Pulse, Noise
Built-in Arbitrary
Waveforms
160 kinds, including Sinc, Exponential Rise, Exponential
Fall, ECG, Gauss, HaverSine, Lorentz, Dual-Tone, etc.
Frequency Characteristics
Sine 1μHz to 30MHz 1μHz to 60MHz
Square
1μHz to 15MHz
1μHz to 25MHz
Ramp
1μHz to 500kHz
1μHz to 1MHz
Pulse
1μHz to 15MHz
1μHz to 25MHz
Harmonic 1μHz to 10MHz 1μHz to 20MHz
Noise (-3dB) 30MHz bandwidth 60MHz bandwidth
Arbitrary Waveform
1μHz to 10MHz
1μHz to 20MHz
Resolution
1μHz
Accuracy
±1ppm of the settings, 18
℃
to 28
℃
Sine Wave Spectrum Purity
Harmonic Distortion
Typical (0dBm)
DC-10MHz (included): <-65dBc
10MHz-30MHz (included): <-55dBc
30MHz-60MHz (included): <-50dBc
Total Harmonic
Distortion
<0.075% (10Hz-20kHz, 0dBm)
Spurious
(non-harmonic)
Typical (0dBm)
≤10MHz: <-70dBc
>10MHz: <-70dBc+6dB/octave
Phase Noise
Typical (0dBm, 10kHz deviation)
10MHz: <-125dBc/Hz