User manual

RIGOL

User’s Guide for DG10× 2 Series

2-24

Figure 2-29

To Set the voltage

Figure 2-30

To Edit the Second Point

Table 2-12 Waveform Parameter Edition Menu

Settings

Explanation

Point#

Select the point to be edited

Time

Set time for the Selected point

Voltage

Set Voltage for the Selected point

Insert

Insert a new point between the defined

points. Use the “Time” and “Voltage” to

define the new point.

Remove

Remove the current point

Save

Save the created waveform to the

non-Volatile Memory.

Instructions

The time for the last definable point should be less than the cycle period in the

waveform.