User manual

RIGOL

User’s Guide for DG10× 2 Series

Channel Coupling Settings

Press Utility  Coupling, enter the following interface.

Figure 2-60

Channel Coupling Setting Interface

Table 2-24 Channel Coupling Setting Menu

Settings

Explanation

Switch

Coupling On

Coupling Off

Open or close the Coupling function

BaseCH

Channel_1

Channel_2

Choose CH1 or CH2 as the base source in

coupling

FreDev

PhaDev

Set the frequency deviation between the two

channels.

Set the phase deviation between the two

channels.

CopyCH

1 2

2 1

Copy the parameters from CH1 to CH2

Copy the parameters from CH2 to CH1

Save the setting and exit

Key Points:

1. Channel Coupling

(1) The coupling is only used for frequency and phase, as shown in the following

figure, the base channel will mark with a “*” sign on the screen. It indicates that

CH1 has coupling in the phase parameter.

Figure 2-61

Coupling Sign Instruction

Coupling Sign