Datasheet

ManualsBrandsRIGOL ManualsLaboratory Test EquipmentFunction Generator, Frequency Generator

RIGOL TECHNOLOGIES, INC.

DG1000Z series function/arbitrary waveform generator is a multi-functional

generator that combines many functions in one, including Function

Generator, Arbitrary Waveform Generator, Noise Generator, Pulse

Generator, Harmonics Generator, Analog/Digital Modulator and Counter.

As a multi-functional, high performance and portable generator, it will be a

new selection in education, R&D, production, test and etc.

Function/Arbitrary

Waveform Generator

Series

DG1000Z

Innovative SiFi (Signal Fidelity): generate arb waveform point-by-point,

restore signal distortionless, precisely adjustable sample rate and

low jitter (200ps)

Arbitrary waveform memory: 8Mpts (standard), 16Mpts (optional)

Standard 2 full functional channels can be used as two independent

generators

±1ppm frequency stability, -125dBc/Hz phase noise

Built-in 8 orders harmonics generator

Built-in 7 digits/s full function frequency counter with 200MHz bandwidth

Up to 160 built-in waveforms

200MSa/s sample rate, 14bits vertical resolution

Convenient arbitrary waveform editing interface

Versatile modulation types: AM, FM, PM, ASK, FSK, PSK and PWM

Standard waveform summing function

Standard channel track function

Standard interfaces: USB Host& Device, LAN(LXI Core Device 2011)

3.5 inches TFT color display

Summary of content (8 pages)

PAGE 1
DG1000Z Series Function/Arbitrary Waveform Generator Innovative SiFi (Signal Fidelity): generate arb waveform point-by-point, restore signal distortionless, precisely adjustable sample rate and low jitter (200ps) Arbitrary waveform memory: 8Mpts (standard), 16Mpts (optional) Standard 2 full functional channels can be used as two independent generators ±1ppm frequency stability, -125dBc/Hz phase noise Built-in 8 orders harmonics generator Built-in 7 digits/s full function frequency counter with 200MHz bandw
PAGE 2
DG1000Z Series Function/Arbitrary Waveform Generator Dimensions: Width×Height×Depth=261.5mm×112mm×318.4mm Weight: 3.
PAGE 3
Feature and Benefits Standard 2 full functional channels Arbitrary waveform function with innovative SiFi technology Up to 160 built-in waveforms Burst function Multiple analog and digital modulations Sweep function Standard harmonic generator Waveform summing function Standard 7 digits/s full function frequency counter with 200MHz bandwidth Channels and system setting In line with LXI Core Device 2011 File Management Function RIGOL 2
PAGE 4
Specifications All the specifications can be guaranteed if the following two conditions are met unless where noted. · The generator is within the calibration period and has performed self-calibration. · The generator has been working continuously for at least 30 minutes under the specified temperature (18℃ ~ 28℃ ). All the specifications are guaranteed unless those marked with “typical”.
PAGE 5
Sample Rate Min Rise/Fall Time Jitter (rms) Editing Mode Harmonic Output Harmonic Order Harmonic Type Harmonic Amplitude Harmonic Phase Output Characteristics Amplitude (into 50 Ω) Range Accuracy Flatness Unit Resolution Offset (into 50 Ω) Range (Peak ac+dc) Accuracy Waveform Output Output Impedance Protection Modulation Characteristics Modulation Type AM Carrier Waveform Source Modulating Waveform Modulation Depth Modulating Frequency FM Carrier Waveform Source Modulating Waveform Modulating Frequency PM C
PAGE 6
Key Frequency PWM Carrier Waveform Source Modulating Waveform Width Deviation Modulating Frequency External Modulation Input Input Range Input Bandwidth Input Impedance 2 mHz to 1 MHz Pulse Internal/External Sine, Square, Ramp, Noise, Arb 0% to 100% of the pulse width 2 mHz to 1 MHz 75 mVRMS to ±5 Vac + dc 50 kHz 1000Ω Burst Characteristics Carrier Waveform Carrier Frequency Burst Count Start/Stop Phase Internal Period Gated Source Trigger Source Trigger Delay Sine, Square, Ramp, Pulse, Noise, Arb (excep
PAGE 7
Trigger Characteristics Trigger Input Level Slope Pulse Width Latency Trigger Output Level Pulse Width Maximum Frequency Reference Clock Phase Offset Range Resolution External Reference Input Lock Range Level Lock Time Input Impedance (Typical) Internal Reference Output Frequency Level Input Impedance (Typical) Sync Output Level Impedance TTL-compatible Rising or falling (selectable) >100ns Sweep: <100 ns (typical) Burst: <300 ns (typical) TTL-compatible > 60 ns (typical) 1 MHz 0° to 360° 0.
PAGE 8
Certification Information in line with EN61326-1:2006 ±4.0kV (contact discharge) ±4.0kV (air discharge) 3 V/m (80 MHz to 1 GHz) 3 V/m (1.4 GHz to 2 GHz) 1 V/m (2.0 GHz to 2.7 GHz) 1 kV power lines 0.5kV (Phase to Neutral) 0.5kV (Phase to PE) 1 kV (Neutral to PE) 3V,0.