Specifications

RIGOL
Quick Guide for DG2000
8
As shown in the figure above, the default signal parameters are:
1kHz Frequency, 5.0 Vpp Amplitude, 0 Vdc Offset and 50% Duty
Cycle.
3. Press Ramp, the waveform icon turns into Ramp with a “Ramp”
typeface in the state area. DG2000 Series Generator can
generate Ramp signal with frequency from 1μHz to 400 kHz and
variable Symmetry. By setting Frequency/Period, Amplitude/
High Level, Offset/ Low level, and Symmetry, the Ramp signal
with different parameters can be generated.
As shown in the figure above, the default signal parameters are:
1kHz Frequency, 5.0 Vpp Amplitude, 0 Vdc Offset and 50%
Symmetry.
4. Press Pulse, the waveform icon turns into Pulse with a “Pulse”
typeface in the state area. DG2000 Series Generator can
generate Pulse signal with frequency from 500μHz to 16MHz
and variable Pulse Width and Edge Time. By setting
Frequency/Period, Amplitude/ High Level, Offset/ Low level,
Pulse Width and Edge Time, the Pulse signal with different
parameters can be generated.