Specifications

RIGOL
Quick Guide for DG2000
9
As shown in the figure above, the default signal parameters are:
1kHz Frequency, 5.0 Vpp Amplitude, 0 Vdc Offset, 20% Duty
Cycle and 50ns Edge Time.
5. Press Noise, the waveform icon turns into Noise with a “Noise”
typeface in the state area. DG2000 Series Generator can
generate Noise signal with Band Width up to 20MHz. By setting
Amplitude/ High Level, Offset/ Low level, the Noise signal with
different parameters can be generated.
As shown in the figure above, the default signal parameters are:
5.0 Vpp Amplitude and 0 Vdc Offset.
6. Press Arb, the waveform icon turns into Arb with an “Arb”
typeface in the state area. DG2000 Series Generator can
generate repeatable arbitrary waveform signals with at most
512K points and 12MHz frequency. By setting Frequency/Period,
Amplitude/ High Level, Offset/ Low level, arbitrary waveform
signals with different parameters can be generated.