Specifications

RIGOL

Quick Guide for DG2000

To Use the Store/Utility/Help Function

As shown in the figure below, there are three keys on the operation

panel, which are used to call the store/recall, utility and help

function. The instruction below will help you familiarize with these

Functions.

1. The Store/Recall key is used to store waveform data and

configure information.

2. The Utility key is used to set the auxiliary system function,

change the output configure parameters, interface setting,

system setting information or perform the instrument self-test

and read the calibration information, etc.

3. The Help key is used to see the help information.

Get help on any key:

To get help on any key of the front panel, press the key and last for

about 1 second, then the help message will appear.