User`s guide

RIGOL
© 2006 RIGOL Technologies, Inc
User’s Guide for DG2000 Series
5-5
Trigger Source
Internal/External/Manual
Rear Panel Connector
External AM
Modulation
± 5 Vpk = 100% modulation
5k input impedance
Input/Output
Frequency Range
10MHz ± 500Hz
Input/Output Voltage
Range
80mVpp~10Vpp/0dBm (typical)
Input/Output
Impedance
2kΩ/50Ω (typical), AC coupled
Time
<1s
External Trigger
TTL-compatible
Trigger Input
Input Level
TTL-compatible
Slope
Rising or falling (selectable)
Pulse Width
> 100 ns
Input Impedance
> 10 k, DC coupled
Linear Sweep
< 500 µs (typical)
Latency Sweep
< 500 ns (typical)
Trigger Output
Level
TTL-compatible into >1k
Pulse Width
> 400ns (typical)
Output Impedance
50 (typical )
Maximum Rate
1 MHz
Notes
[1]
:
 The amplitude range (50Ω):
The output frequency >10MHz, the amplitude range: 20mVpp ~ 5Vpp;
 The amplitude range (High Z):
The output frequency >10MHz, the amplitude range: 40mVpp ~ 10Vpp.