User`s guide

RIGOL
© 2006 RIGOL Technologies, Inc.
User’s Guide for DG2000 Series
1
Index
AM ...........................................2-31
Appendix ................................... 6-1
Common Prompt Messages ......... 4-1
Conflict Settings ......................... 4-6
Contact RIGOL ........................... 6-4
Data Overflow ...........................4-10
DG2000 Series Accessories .......... 6-1
Edge Time ................................2-13
Error Messages .......................... 4-5
Factoruy Default ........................2-77
FM ...........................................2-33
Frequency Deviation ..................2-35
FSK ..........................................2-36
General Care and Cleaning .......... 6-3
General Inspection ..................... 1-2
General Specifications ................. 5-7
Handle Adjustment ..................... 1-3
Mod ........................ 2-36, 2-38, 2-46
PM ...........................................2-38
Pulse Width ..............................2-13
PWM ........................................2-40
Set a Waveform ......................... 1-8
Set the Gated Burst ...................2-48
Set the N-Cycle Burst .................2-46
Specifications ............................. 5-2
Square .....................................2-16
Store/Recall ............. 2-50, 2-51, 2-60
Test .........................................2-79
The DG2000 User Interface .......... 1-7
The Front/Rear Panel .................. 1-4
The interconnection of DG2000 and
DS1000 .................................... 2-52
The Menu/Graph Mode ................ 2-2
To Generate Burst ..................... 2-45
To Generate Sweep ................... 2-42
To Generate the Modulated Waveform
............................................... 2-30
To Set Arbitrary Signals ............. 2-17
To Set Modulate/ Sweep/Burst ... 1-11
To Set Noise Signals .................. 2-16
To Set Output Parameter ........... 2-63
To Set Pulse Signals .................. 2-12
To Set Ramp Signals ................. 2-10
To Set Sine Signals ...................... 2-3
To Set Square Signals .................. 2-7
To Set the DC Output ................ 2-60
To Set the Sync Output ............. 2-61
To Set the System ..................... 2-72
To Set the Utility Function .......... 2-58
To Set Trigger/Output ............... 1-13
To Store and Recall ................... 2-49
To Use Digital Input .................. 1-14
To Use Store/Utility/Help Function1-15
Troubleshooting ........................ 4-17
Use the Built-in Help System ...... 2-81
Warranty .................................... 6-2