User`s guide

RIGOL

User’s Guide for DG2000 Series

2-20

2. To Select the Stored Waveform

Press Arb  Load  Stored , and enter the following interface. Select the

desired waveform document which will be displayed in inverse color and press

Recall to recall it from the memory.

Figure 2-30 The Operation Menu

Table 2-9 The Stored Arbitrary Waveform Menu

Function

Settings

Explanation

Disk

Local

Select display route for the

system information

U Disk

(When U Disk

is connected )

Type

State

Setting of the Generator

Data

Arbitrary waveform file

All

All types of documentation

Recall

Recall the waveform or Setting

information in the specific

position in the memory.

Store

Save the waveform to the

appointed place( See Table

2-24)

Remove

Remove any waveform that

has been stored in the memory

Instructions:

When there is no waveform stored in the Arb1、Arb2、Arb3 and Arb4, this menu

will hide (The followings is the same and will not explain again)