User`s guide

RIGOL
© 2006 RIGOL Technologies, Inc
User’s Guide for DG2000 Series
2-59
Table 2-26 The Menu Expanations of Utility System Setting
Function
Menu
Settings
Explanation
DC On/
Off
On
Set the output waveform as DC
Off
Set the output waveform as Arbitrary.
Sync On/
Off
On
Activate the Sync Signal of the [Sync]
Connector on the front panel.
Off
Deactivate the Sync Signal of the [Sync]
Connector on the front panel.
Output
Set the Output parameter (Table 2-27)
I/O
Set the I/O (Table 2-28)
System
Set the System Configuration (Table 2-33)
Test/Cal
Test and Calibrate the instrument (Table
2-37)
Instruction
Sync Switch Setting：
When the amplitude is low relatively, you can reduce the distortion of the output
signal by prohibiting the Sync Signal. And the current storage is in the Non-Volatile
Memory.