Instructions

RIGOL Chapter 2 Command System
2-128 DG2000 Programming Guide
[:SOURce[<n>]]:SWEep:HTIMe[:STOP]
Syntax
[:SOURce[<n>]]:SWEep:HTIMe[:STOP] {<seconds>|MINimum|MAXimum}
[:SOURce[<n>]]:SWEep:HTIMe[:STOP]? [MINimum|MAXimum]
Description
Sets the stop hold time of the sweep function of the specified channel.
Queries the stop hold time of the sweep function of the specified channel.
Parameter
Name
Type
Range
Default
[<n>]
Discrete
1|2
1
<seconds>
Real
0 s to 500 s
0 s
Remarks
 Stop Hold is the duration that the output signal continues outputting with the "Stop Frequency" after
the generator has swept from the "Start Frequency" (
[:SOURce[<n>]]:FREQuency:STARt) to the
"Stop Frequency" (
[:SOURce[<n>]]:FREQuency:STOP).
 When [:SOURce[<n>]] or [<n>] is omitted, the system sets the related parameters of CH1 by default.
 The generator will restart to sweep and output from the specified "Start Frequency" after the Stop
Hold time is modified.
Return Format
The query returns the stop hold time in scientific notation, with 7 effective digits. For example,
1.000000E+00 (the stop hold time is 1 s).
Example
:SOUR1:SWE:HTIM 1 /*Sets the stop hold time of the sweep function of CH1 to 1 s.*/
:SOUR1:SWE:HTIM? /*Queries the stop hold time of the sweep function of CH1 and the query returns
1.000000E+00.*/
[:SOURce[<n>]]:SWEep:RTIMe
Syntax
[:SOURce[<n>]]:SWEep:RTIMe {<seconds>|MINimum|MAXimum}
[:SOURce[<n>]]:SWEep:RTIMe? [MINimum|MAXimum]
Description
Sets the return time of the sweep function of the specified channel.
Queries the return time of the sweep function of the specified channel.
Parameter
Name
Type
Range
Default
[<n>]
Discrete
1|2
1
<seconds>
Real
0 s to 500 s
0 s
Remarks
 Return time indicates the time that the output signal restores from "Stop Freq"
(
[:SOURce[<n>]]:FREQuency:STARt) to "Start Freq" ([:SOURce[<n>]]:FREQuency:STOP) after the
signal generator sweeps from "Start Freq" to "Stop Freq" and the "Stop Hold"
(
[:SOURce[<n>]]:SWEep:HTIMe[:STOP]) time expires.
 When [:SOURce[<n>]] or [<n>] is omitted, the system sets the related parameters of CH1 by default.
 The generator will restart to sweep and output from the specified "Start Frequency" once the return
time is modified.