Instructions

ManualsBrandsRigol ManualsFunction GeneratorsRigol DG2052 Mains-powered 0.000001 Hz - 50 MHz 2-channel Sinus, Rectangle, Noise, Pulse, Triangle, Arbitrary

RIGOL Chapter 2 Command System

2-48 DG2000 Programming Guide

:SOURce Commands

The :SOURce commands are used to set and query the channel parameters, the related parameters of the

modulation, sweep, and burst functions, the coupling and waveform combination functions as well as

enabling or disabling the corresponding function.

The frequency ranges available for different models and different waveforms of DG2000 series are as

shown in the table below.

Table 2-1 Frequency Range of Different Models and Different Waveforms of DG2000 Series

Frequency

Characteristics

DG2052 DG2072 DG2102

Sine

1 μHz to 50 MHz

1 μHz to 70 MHz

1 μHz to 100 MHz

Square

1 μHz to 15 MHz

1 μHz to 20 MHz

1 μHz to 25 MHz

Ramp 1 μHz to 1.5 MHz 1 μHz to 1.5 MHz 1 μHz to 2 MHz

Pulse

1 μHz to 15 MHz

1 μHz to 20 MHz

1 μHz to 25 MHz

Harmonic 1 μHz to 20 MHz 1 μHz to 20 MHz 1 μHz to 25 MHz

Noise (-3 dB) 100 MHz Bandwidth

Arbitrary

Waveform

1 μHz to 15 MHz 1 μHz to 20 MHz 1 μHz to 20 MHz

Dual-tone

1 μHz to 20 MHz

PRBS

2 kbps to 40 Mbps

2 kbps to 50 Mbps

2 kbps to 60 Mbps

RS232

baud rate range: 9600, 14400, 19200, 38400, 57600, 115200, 128000, 230400

Sequence

2 k to 60 MSa/s

Command List:

 :SOURce:APPLy

 :SOURce:BURSt

 :SOURce:FREQuency

 :SOURce:FUNCtion

 :SOURce:HARMonic

 :SOURce:MARKer

 :SOURce[:MOD]:AM

 :SOURce[:MOD]:ASKey

 :SOURce[:MOD]:FM

 :SOURce[:MOD]:FSKey

 :SOURce[:MOD]:PM

 :SOURce[:MOD]:PSKey

 :SOURce[:MOD]:PWM

 :SOURce:MOD

 :SOURce:PERiod

 :SOURce:PHASe

 :SOURce:PULSe

 :SOURce:SUM

 :SOURce:SWEep