Instructions

RIGOL Chapter 2 Command System
2-28 DG2000 Programming Guide
:LXI Commands
Command List:
 :LXI:MDNS:ENABle
 :LXI:RESet
 :LXI:RESTart
:LXI:MDNS:ENABle
Syntax
:LXI:MDNS:ENABle {ON|1|OFF|0}
:LXI:MDNS:ENABle?
Description
Enable or disable the multiple DNS system (mDNS).
Query the status of the multiple DNS system (mDNS).
Parameter
Name
Type
Range
Default
{ON|1|OFF|0}
Bool
ON|1|OFF|0
ON
Return Format
The query returns ON or OFF.
Example
:LXI:MDNS:ENAB ON /*Enable the multiple DNS system*/
:LXI:MDNS:ENAB? /*Query the status of the multiple DNS system and the query returns ON*/
:LXI:RESet
Syntax
:LXI:RESet
Description
Reset the LAN setting to the known operation state, beginning from DHCP. If DHCP fails, AutoIP will be
used.
Remarks
 Several seconds are required for the LAN interface to restart (depending on your network) after
sending this command.
 If the LAN interface or specific LAN service is disabled, you must restart the interface or service
separately as well as turn off and restart the instrument to make the LAN works normally.
:LXI:RESTart
Syntax
:LXI:RESTart
Description
Restart the LAN according to the current setting.