Instructions

RIGOL Chapter 1 Quick Guide
1-4 DG2000 User Guide
Front Panel Overview
Figure 1-1 Front Panel
1. Power Key
Turns on or off the generator.
2. USB HOST
Supports FAT32 format Flash type USB storage device, RIGOL TMC digital
oscilloscope (DS), and USB-GPIB interface converter.
 USB storage device: read the waveform or state files saved in the USB
storage device or store the current instrument states or edited waveform
data into the USB storage device. Besides, the contents displayed on the
screen can also be saved to the USB storage device in the format of an
image (*.Bmp).
 TMC DS: seamlessly interconnects with the RIGOL DS that meets the TMC
standard. Reads and stores the waveform data collected by the DS and
rebuilds waveforms without distortion.
 USB-GPIB interface converter (option): extends the GPIB interface for
RIGOL instruments that integrates the USB Host interface but not the GPIB
interface.
3. Align Key
Performs the phase alignment operation. For details, refer to descriptions in
"Align Phase".
4. CH1 Output Connector
BNC connector, with 50 Ω nominal output impedance.
When Output1 is enabled (the backlight turns on), this connector outputs
waveforms according to the current configuration of CH1.
1 2 3 4 5 6 7 8
14 13 12 11 10 9