User Manual

RIGOL
© 2006 RIGOL Technologies, Inc.
User’s Guide for DG3000 Series
2-12
To Set the Symmetry
1. Press Ramp  Symmetry , to set the Symmetry.
The Symmetry shown on the screen when the instrument is powered is the
default value or the set value beforehand. When changing the function, if the
current value is valid for the new waveform, it will be used sequentially.
2. Input the desired Symmetry
Use the keypad or the knob to input the desired value, choose the unit, and press
the corresponding button. The Generator will change the waveform immediately.
Figure 2-11 Setting the Symmetry
Current
Parameter:
Symmetry