User Manual

RIGOL
© 2006 RIGOL Technologies, Inc.
User’s Guide for DG3000 Series
2-62
To Set the Utility Function
With the Utility Function, you can set the parameters of the Generator such as: DC
On/Off, Sync On/Off, Output Parameter, Interface Parameter, System Setting and
Testing Parameter. The DC switch offers the options of DC output or Arbitrary
Waveform Output. Sync Switch offers the option to choose the Sync Signal or not.
Output Setting provides the parameter setting for Load/Impedance, Range, Normal/
Inverse and Phase. Interface Setting offers the storage and load of the configure
parameter setting for GPIB (IEEE-488), LAN, RS232 or USB remove Control. The
System Setting provides the setting for Language, Display, Beep, Screen Guard,
Format, Power System Configure and default setting; Test provides the self-testing
and calibration storage.
Press Utility button, to enter the Utility Menu. Its functions are listed below in table 2
－26.
Figure 2-72 Table 2-35 The Menu Explanations of Utility System Setting
(Page1/2)
Function
Menu
Settings
Explanation
DC
On
Off
Set the output waveform to be DC
Set the output waveform to be Arbitrary.
Sync
On
Off
Activate the Sync Signal on the [Sync]
Connector on the front panel.
Deactivate the Sync Signal on the [Sync]
Connector on the front panel.
Output
Setup
Set the Output parameter
I/O
Setup
Set the I/O