User Manual

RIGOL
© 2006 RIGOL Technologies, Inc.
User’s Guide for DG3000 Series
2-88
Figure 2-101 Table 2-51 The Menu Explanations of Calibration Start
To perform the calibration begin with from step one, press Begin button. The
operation menu is as follows in table 2-52.
Figure 2-102 Table 2-52 The Menu Explanations of Calibration Setting
To perform calibration from step N, choose Setup Number, input the desired
calibration step and press Begin . The calibration will start from step N.
The parameter to be calibrated is closely related to the waveform parameter. For
example, the main calibration parameters for pulse are frequency, voltage, Duty Cycle
and the time. Each parameter has to be calibrated.
Note：Please calibrate the instrument under specialist’s supervision. If any
malfunction occurs after the calibration, please contract the local RIGOL
support center.
Function
Menu
Settings
Explanation
Setup
Number
Choose the steps of the Calibration.
Begin
Begin Calibration
End
Cal
Finish Calibration and return the upper
menu.
Function
Menu
Settings
Explanation
Setup
Number
Perform the Calibration Step selected.
Meas’d
Frequency
“Meas’d Freq” is the instruction for
current step, which can not be operated
on.
Enter
Value
Input the value calibrated.
CANCEL
STEP
Cancel the current calibration step.
!