User Manual
Table Of Contents
- Safety Notices
- The Introduction of DG3000 Series
- Getting Started
- Operating Your Generator
- Application & Examples
- Example 1: To Generate a Sine Wave
- Example 2: To Generate a Square Wave
- Example 3: To Generate a Ramp Wave
- Example 4: To Generate a Pulse Wave
- Example 5: To Generate a Noise Wave
- Example 6: To Generate an Arbitrary Waveform
- Example 7: To Create an Arbitrary Waveform
- Example 8: To Generate an AM Waveform
- Example 9: To Generate an FSK Waveform
- Example 10: To Generate a PWM waveform
- Example 11: To Generate Linear Sweep
- Example 12: To Generate a Burst Waveform
- Prompt messages & troubleshooting
- Specifications
- Appendix
- Index
RIGOL
© 2006 RIGOL Technologies, Inc.
User’s Guide for DG3000 Series
5-2
Specifications
Frequency Characteristic（DG3121A）
Waveforms
Sine, Square, Ramp, Triangle, Pulse, Noise, DC, Arb
Sine
1µHz to120MHz
Square
1µHz to 60MHz
Pulse
500µHz to 30MHz
Ramp
1µHz to1MHz
White Noise
50MHz bandwidth (-3dB) (typical)
Frequency Characteristic（DG3101A）
Waveforms
Sine, Square, Ramp, Triangle, Pulse, Noise, DC, Arb
Sine
1µHz to100MHz
Square
1µHz to 50MHz
Pulse
500µHz to 25MHz
Ramp
1µHz to1MHz
White Noise
40MHz bandwidth (-3dB) (typical)
Frequency Characteristic（DG3061A）
Waveforms
Sine, Square, Ramp, Triangle, Pulse, Noise, DC, Arb
Sine
1µHz to 60MHz
Square
1µHz to 30MHz
Pulse
500µHz to 20MHz
Ramp
1µHz to1MHz
White Noise
30MHz bandwidth (-3dB) (typical)
Resolution
1 µHz
Accuracy
Within 90 days 10 ppm
Within 1 year 20 ppm
18°C ~ 28°C
Temperature index
< 2 ppm/°C
Sine Wave Spectral Purity
Harmonic Distortion
< 1 Vpp > 1 Vpp
DC to 20 kHz -70 dBc -70 dBc
20 kHz to 100 kHz -65 dBc -60 dBc
100 kHz to 1 MHz -50 dBc -45 dBc
1 MHz to 10 MHz -40 dBc -35 dBc
Total Harmonic
Distortion
DC to 20 kHz, 1Vpp <0.2%