User Manual

RIGOL
© 2006 RIGOL Technologies, Inc.
User’s Guide for DG3000 Series
3-10
Example 6: To Generate an Arbitrary Waveform
How to generate an arbitrary waveform (Sinc) with 8MHz Frequency, 4Vrms
Amplitude and 0Vdc Offset.
Steps:
1. Set the Type of the Arbitrary Waveform.
(1) Press Arb  Sel Wform , to choose the built-in waveform.
(2) Press Built-In  Sinc . There are five built-in arbitrary waveforms.
Choose Sinc, and press any key to return to Arb Main Menu.
2. Set the Frequency.
(1) Press Pulse  Freq and choose Freq , which will display in reverse
color.
(2) Input “8” from the keypad and choose the unit “MHz” to set the Frequency
to be 8MHz.
3. Set the Amplitude.
(1) Press Ampl and choose the Ampl selection which will display in
reverse color.
(2) Enter “4” from the keypad and choose the unit “Vrms” to set the Amplitude to
be 4 Vrms.
4. Set the Offset.
(1) Press Offset to choose the Offset selection which will display in
reverse color.
(2) Enter “0” from the keypad and choose the unit “Vdc” to set the Offset to be
0Vdc.
When the Arbitrary Waveform’s Type, Frequency, Amplitude and Offset are set, the
waveform generated is shown in figure 3-6.