User Manual
Table Of Contents
- Safety Notices
- The Introduction of DG3000 Series
- Getting Started
- Operating Your Generator
- Application & Examples
- Example 1: To Generate a Sine Wave
- Example 2: To Generate a Square Wave
- Example 3: To Generate a Ramp Wave
- Example 4: To Generate a Pulse Wave
- Example 5: To Generate a Noise Wave
- Example 6: To Generate an Arbitrary Waveform
- Example 7: To Create an Arbitrary Waveform
- Example 8: To Generate an AM Waveform
- Example 9: To Generate an FSK Waveform
- Example 10: To Generate a PWM waveform
- Example 11: To Generate Linear Sweep
- Example 12: To Generate a Burst Waveform
- Prompt messages & troubleshooting
- Specifications
- Appendix
- Index
RIGOL
© 2006 RIGOL Technologies, Inc.
User’s Guide for DG3000 Series
4-10
Data Overflow
Sine Wave frequency upper limit=120MHz
The Sine wave frequency upper limit is 120MHz. If the specified frequency is greater
than 120MHz, the system will adjust the frequency to 120MHz automatically.
Sine Wave frequency lower limit= 1μHz
The Sine wave frequency lower limit is 1μHz. If the specified frequency is less than
1μHz, the system will adjust the frequency to 1μHz automatically.
Square Wave frequency upper limit=60MHz
The Square wave frequency upper limit is 60MHz. If the specified frequency is
greater than 60MHz, the system will adjust the frequency to 60MHz automatically.
Square Wave frequency lower limit=1μHz
The Square wave frequency lower limit is 1μHz. If the specified frequency is less
than 1μHz, the system will adjust the frequency to 1μHz automatically.
Ramp Wave frequency upper limit= 1MHz
The Ramp wave frequency upper limit is 1 MHz. If the specified frequency is greater
than 1 MHz, the system will adjust the frequency to 1 MHz automatically.
Ramp Wave frequency lower limit= 1μHz
The Ramp wave frequency lower limit is 1μHz. If the specified frequency is less than
1μHz, the system will adjust the frequency to 1μHz automatically.
Pulse Wave frequency upper limit=30MHz
The Pulse wave frequency upper limit is 30MHz. If the specified frequency is greater
than 30MHz, the system will adjust the frequency to 30MHz automatically.
Pulse Wave frequency lower limit=500μHz
The Pulse wave frequency lower limit is 500μHz. If the specified frequency is less
than 500μHz, the system will adjust the frequency to 500μHz automatically.
Arb Wave frequency upper limit= 25MHz
The Arb wave frequency upper limit is 25MHz. If the specified frequency is greater
than 25MHz, the system will adjust the frequency to 25MHz automatically.
Arb Wave frequency lower limit= 1μHz
The Arb wave frequency lower limit is 1μHz. If the specified frequency is less than
1μHz, the system will adjust the frequency to 1μHz automatically.
Sine Wave period upper limit= 1Ms
The Sine Wave Period upper limit is 1Ms. If the specified period is greater than 1Ms,
the system will adjust the period to 1Ms automatically.
Sine Wave period lower limit= 8.33ns
The Sine Wave Period lower limit is 8.33ns. If the specified period is less than 8.33ns,
the system will adjust the period to 8.33ns automatically.
Square Wave period upper limit= 1Ms