User Manual
Table Of Contents
- Safety Notices
- The Introduction of DG3000 Series
- Getting Started
- Operating Your Generator
- Application & Examples
- Example 1: To Generate a Sine Wave
- Example 2: To Generate a Square Wave
- Example 3: To Generate a Ramp Wave
- Example 4: To Generate a Pulse Wave
- Example 5: To Generate a Noise Wave
- Example 6: To Generate an Arbitrary Waveform
- Example 7: To Create an Arbitrary Waveform
- Example 8: To Generate an AM Waveform
- Example 9: To Generate an FSK Waveform
- Example 10: To Generate a PWM waveform
- Example 11: To Generate Linear Sweep
- Example 12: To Generate a Burst Waveform
- Prompt messages & troubleshooting
- Specifications
- Appendix
- Index
RIGOL
© 2006 RIGOL Technologies, Inc.
User’s Guide for DG3000 Series
5-7
General Specifications
Display
Type
3.8 inch STN LCD
Resolution
320 Horizontal x RGB X 240 Vertical
Grey Degree
64 color
Contrast (typical)
150 ：1
Light (typical)
300 nit
Power
Supply
100-240 VAC
RMS
，45-440Hz, CAT II
Consumption
Less than 50W
Fuse
2A, T Level, 250V
Environment
Temperature Range
Operation：10℃~+40℃
Non-operation：-20℃~+60℃
Cooling
Mandatory Fan cooling
Humidity Range
Below +35℃：≤90％ relative humidity
+35℃~+40℃：≤60％relative humidity
Height Range
Operation : below 3,000m
Non-operation: below 15,000m
Instrument Specifications
Dimension
Width
232mm
Height
107.5mm
Depth
365+9.5mm (9.5 mm is the BNC Depth)
Weight
Package excluded
3.56kg
Package Included
5.10kg
IP Protection
IP2X
Calibration Interval
One year suggested