User Manual

RIGOL
© 2006 RIGOL Technologies, Inc.
User’s Guide for DG3000 Series
6-I
Index
Adjust the Phase ...................... 2-70
AM .......................................... 2-33
Beep........................................ 2-78
Burst ....................................... 1-13
Cal Info ................................... 2-87
Chinese Input........................... 2-61
Common Prompt Message ........... 4-1
Conflict Setting ........................... 4-6
Contact RIGOL ........................... 6-4
Create a New Waveform ........... 2-26
Current Config .......................... 2-75
Data Overflow .......................... 4-10
DG3000 Series Accessories .......... 6-1
Display Control ......................... 2-85
DNS Setup ............................... 2-74
Duty Cycle ................................. 2-8
Edge Time ............................... 2-14
Edit the Arbitrary Waveform ...... 2-25
English Input ............................ 2-60
Error Message ............................ 4-5
FM .......................................... 2-34
Frequency Deviation ................. 2-35
FSK ......................................... 2-36
General Care and Cleaning .......... 6-3
General Inspection ..................... 1-2
General Specifications ................. 5-7
Generate Burst ......................... 2-44
Generate Sweep ....................... 2-42
Generate the Modulated Waveform
............................................... 2-32
Handle Adjustment ..................... 1-3
IP Setup .................................. 2-73
Language Setup ....................... 2-82
Modulation Depth ..................... 2-33
Perform the Calibration ............. 2-87
PM ........................................... 2-38
Power On ................................. 2-78
Pulse Width .............................. 2-14
PWM ........................................ 2-40
Return to Default Setting ........... 2-83
RS232 Setting........................... 2-76
Safety Notices .............................. II
Safety Terms and Symbols ............ IV
Save a File ............................... 2-59
Save Data ................................ 2-51
Save the data in the Volatile memory
into the Non-Volatile Memory .... 2-56
Save the Instrument State ......... 2-50
Secure Code ............................. 2-87
Select the built-in Arbitrary Waveform
............................................... 2-21
Self-Test .................................. 2-87
Set a Waveform .......................... 1-8
Set Arbitrary Signals ................. 2-19
Set Modulate/ Sweep/Burst ....... 1-12
Set Noise Signals ...................... 2-17
Set Output Parameter ............... 2-67
Set Pulse Signals ...................... 2-13
Set Ramp Signals ...................... 2-10
Set Sine Signals .......................... 2-2
Set Square Signals ...................... 2-7
Set the DC Output .................... 2-64
Set the Format ......................... 2-79
Set the I/O ............................... 2-71
Set the Invert Waveform ........... 2-69
Set the LAN .............................. 2-72
Set the Output Load .................. 2-68
Set the Sync Output .................. 2-65