User Manual
Table Of Contents
- Safety Notices
- The Introduction of DG3000 Series
- Getting Started
- Operating Your Generator
- Application & Examples
- Example 1: To Generate a Sine Wave
- Example 2: To Generate a Square Wave
- Example 3: To Generate a Ramp Wave
- Example 4: To Generate a Pulse Wave
- Example 5: To Generate a Noise Wave
- Example 6: To Generate an Arbitrary Waveform
- Example 7: To Create an Arbitrary Waveform
- Example 8: To Generate an AM Waveform
- Example 9: To Generate an FSK Waveform
- Example 10: To Generate a PWM waveform
- Example 11: To Generate Linear Sweep
- Example 12: To Generate a Burst Waveform
- Prompt messages & troubleshooting
- Specifications
- Appendix
- Index
RIGOL
© 2006 RIGOL Technologies, Inc.
User ’s Guide for DG3000 Series
6-II
6-II
Set the System ......................... 2-77
Set the Utility Function .............. 2-62
Set Trigger/Output .................... 1-14
Specifications ............................. 5-2
Store and Recall ....................... 2-48
Store/Recall .............................. 2-59
Symmetry ................................ 2-11
Test ......................................... 2-86
The Front/Rear Panel .................. 1-4
The Seamless Interaction of DG3000
and DS1000 .............................. 2-52
To get help on .......................... 1-16
Troubleshooting ........................ 4-17
Use Digital Input ....................... 1-15
Use Store/Utility/Help Function ... 1-16
Use the Built-in Help System ...... 2-89
Use USB Storage ....................... 2-58
Warranty .................................... 6-2