User Manual
Table Of Contents
- Safety Notices
- The Introduction of DG3000 Series
- Getting Started
- Operating Your Generator
- Application & Examples
- Example 1: To Generate a Sine Wave
- Example 2: To Generate a Square Wave
- Example 3: To Generate a Ramp Wave
- Example 4: To Generate a Pulse Wave
- Example 5: To Generate a Noise Wave
- Example 6: To Generate an Arbitrary Waveform
- Example 7: To Create an Arbitrary Waveform
- Example 8: To Generate an AM Waveform
- Example 9: To Generate an FSK Waveform
- Example 10: To Generate a PWM waveform
- Example 11: To Generate Linear Sweep
- Example 12: To Generate a Burst Waveform
- Prompt messages & troubleshooting
- Specifications
- Appendix
- Index
RIGOL
© 2006 RIGOL Technologies, Inc.
User’s Guide for DG3000 Series
2-49
Figure 2-57 Table 2-33 The Menu Explanations of Save and Recall (Page 2/2)
About the browser
The directory selection shift is done by the direction keys. In the directory mode,
pressing the right key will open the lower directory while the left key will fold the
directory. Up and Down key are used to shift between the directories; in the Path
mode, right key stands for the lower directory, left key upper, up key route, and down
key the lowest or the stroll bar between the files.
Function
Menu
Settings
Explanation
Delete
Delete the selected file