Quick Start Guide

RIGOL
Quick Guide for DG5000
7
14. Modulation
Generate modulated waveforms. Provide versatile common modulations and
user defined IQ modulation.
 Common Modulations: Support internal and external modulations, generate
AM, FM, PM, ASK, FSK, PSK and PWM modulated signal.
 User Defined IQ Modulation: Support internal and external modulation,
generate IQ modulated signal.
15. Sweep
Generate the frequency sweeping signal of Sine, Square, Ramp and Arbitrary
Waveforms (except DC).
 Support three sweep types: Linear, Log and Step.
 Set Start Hold, End Hold and Return Time.
 Provide the “Mark” function.
 When the function is enabled, the backlight of the button turns on.
16. Burst
Generate burst waveforms of Sine, Square, Ramp, Pulse and Arbitrary waveform
(except DC).
 Support three burst types: N Cycle, Infinite and Gated.
 Noise can also be used to generate Gated burst.
 When the function is enabled, the backlight of the button turns on.
 In remote mode, press this button to switch to local mode.
17. Store/Recall
Store/recall the instrument state or user-defined arbitrary waveform data.
 Support file management system to execute normal file operations.
 Provide 1 GBytes built-in non-volatile memory (C Disk) and two external USB
flash devices (D Disk and E Disk). In addition, files stored in a USB flash
device can be copied to C Disk for long-term preservation.
 When the function is enabled, the backlight of the button turns on.
18. Utility
Provide some advanced operations, including system parameters setting,
waveform saving and printing, functions expanding and the remote control
interfaces configuration.
When the function is enabled, the backlight of the button turns on.
19. Help
To get context help information about any front-panel key or menu softkey, press