Quick Start Guide

RIGOL

Quick Guide for DG5000

this key until it is illuminated and then press the desired key.

20. Knob

Be used to increase (clockwise) or decrease (anticlockwise) the current

highlighted number. Also can be used to select file location or switch the

character of the soft keyboard when entering file name.

21. Direction Keys

Be used to switch the digits of the number, the data page and the file locations.

22. Numeric Keyboard

Consists of numbers (0~9), decimal point (.) and operators (+/-). Notice that, if

a negative required, please input an operator “-” before the numbers. In addition,

the decimal point “.” also can be used to switch units quickly.

23. Channel Toggle

For dual-channel model: switch and toggle a channel.

For single-channel model: not available.

24. CH1 Output Control

For dual-channel model: control the output of CH1. When the output function

enables, the backlight of the button goes on.

For single-channel model: trigger “Sweep” and “Burst” manually.

25. CH2 Output Control

For dual-channel model: control the output of CH2. When the output function

enables, the backlight of the button turns on.

For single-channel model: control the output of the main channel. When the

output function enables, the backlight of the button turns on.

26. CH1 Output

This BNC connector is used as an output terminal.

For dual-channel model: enable or disable waveform signals generated from

[Output] connector corresponding to CH1. The nominal output impedance is 50

Ω.

For single-channel model: output a TTL-compatible pulse synchronized with the

main output. The nominal source impedance is 50 Ω.

27. CH2 Output

This BNC connector is used as an output terminal. The nominal output