Quick Start Guide

RIGOL
Quick Guide for DG5000
15
1. Status Bar
Indicate system status. For example, an icon denotes that a USB flash
device has been detected.
2. Current Function
Show the current active function. For example, “Sine” denotes that sine wave has
been selected at present.
3. Channel Label Bar
Be divided into two parts which marks the display areas of CH1 and CH2
respectively. The currently selected channel label will be highlighted.
4. Frequency Display
Display the current waveform frequency in each channel. Press corresponding
softkey Freq and use the numeric keyboard or knob to modify this parameter.
The parameter that can be modified currently will be highlighted.
5. Amplitude Display
Display the current waveform amplitude in each channel. Press corresponding
softkey Ampl and use the numeric keyboard or knob to modify this parameter.
The value that can be modified currently will be highlighted.
6. Waveform Display
Display the currently selected waveform shape in each channel. The waveform of
the currently selected channel will be highlighted.
7. Output Configuration
Display the current output configuration in each channel, including “Output
resistance” and “Attenuation setting”.
8. Menu Softkey
Press any softkey to activate the corresponding function.