Data Sheet

RIGOL
10
Period Measurement Measurement Range 4 ns to 1,000 ks
Voltage Range and Sensitivity (non-modulating signal)
DC Coupling
DC Offset Range ±1.5 Vdc
1 μHz to 100 MHz 50 mVRMS to ±2.5 (Vac+dc)
100 MHz to 240 MHz 100 mVRMS to ±2.5 (Vac+dc)
AC Coupling
1 μHz to 100 MHz 50 mVRMS to ±2.5 Vpp
100 MHz to 240 MHz 100 mVRMS to ±2.5 Vpp
Pulse Width and Duty Cycle Measurement
Frequency and Amplitude
Ranges
1 μHz to 25 MHz 50 mVRMS to ±2.5 (Vac+dc)
DC Coupling
Pulse Width
Min. Pulse Width ≥20 ns
Pulse Width Resolution 5 ns
Duty Measurement Range (display) 0% to 100%
Input Characteristics
Input Signal Range Breakdown Voltage ±7 (Vac+dc)
Input Impedance =
1 MΩ
Input Adjustment
Coupling Mode AC DC
High Frequency Rejection
On: Input Bandwidth = 150 kHz;
Off: Input Bandwidth = 240 MHz
Input Trigger
Trigger Level Range -2.5 V to +2.5 V
Trigger Sensitivity Range High, Low
GateTime
1 ms 1.048 ms
10 ms 8.389 ms
100 ms 134.218 ms
1 s 1.074 s
10 s 8.590 s
>10 s >8.590 s
Trigger Characteristics
Trig Input
Level TTL-compatible
Slope Rising or falling (selectable)
Pulse Width >100 ns
Latency
Sweep: <100 ns (typical)
Burst: <350 ns (typical)
Trigger Output
Level TTL-compatible
Pulse Width >60 ns (typical)
Max. Frequency 1 MHz
Two-channel Characteristics - Phase Offset
Range 0° to 360°
Waveform Phase Resolution 0.03°
Reference Clock
External Reference Input
Lock Range 10 MHz ± 50 Hz
Level 250 mVpp to 5 Vpp
Lock Time <2 s
Input Impedance(Typical) 1 kΩ, AC coupling
Internal Reference Output
Frequency 10 MHz ± 50 Hz
Level 3.3 Vpp
Output Impedance(Typical) 50 Ω, AC coupling
Synchronous Output
Level TTL-compatible
Impedance 50 Ω, nominal value