Datasheet

ManualsBrandsRIGOL ManualsLaboratory Test EquipmentMains-powered 25 MHz (max) 1-channel Arbitrary, Triangle, Lorentz curve, Pulse, Noise, Rectangle, Sinus Ma

RIGOL

DG800

Unique SiFi II (Signal Fidelity II) technology: generate the arbitrary

waveforms point by point; recover the signal without distortion; sample

rate accurate and adjustable; jitter of all the output waveforms

(including Sine, Pulse, etc.) as low as 200 ps

2 Mpts memory depth (standard); 8 Mpts memory depth (optional) per

channel for arbitrary waveforms

Optional dual-channel with the same performance, equivalent to two

independent signal sources

High frequency stability: ±1 ppm; low phase noise: -105 dBc/Hz

Built-in high-order harmonic generator (at most 8-order harmonics)

Built-in 7 digits/s, 240 MHz bandwidth full featured frequency counter

Up to 160 built-in arbitrary waveforms, covering the common signals

in engineering application, medical electronics, auto electronics, math

processing, and other various elds

Sample rate up to 125 MSa/s, vertical resolution 16 bits

Arbitrary waveform sequence editing function available; arbitrary

waveforms also can be generated through the PC software

Various analog and digital modulation functions: AM, FM, PM, ASK, FSK,

PSK, and PWM.

Standard waveform combine function, capable of outputting specied

waveforms combined with the basic waveforms

Standard channel tracking function, when enabled, all the parameters of

both channels are updated based on users' congurations

USB Host&Device interface (standard); USB-GPIB function supported

4.3'' TFT color touch screen

RS232, PRBS, and Dualtone outputs supported

Function/Arbitrary Waveform Generator

Series

Summary of content (12 pages)

PAGE 1
DG800 Series Function/Arbitrary Waveform Generator Unique SiFi II (Signal Fidelity II) technology: generate the arbitrary waveforms point by point; recover the signal without distortion; sample rate accurate and adjustable; jitter of all the output waveforms (including Sine, Pulse, etc.
PAGE 2
Design Features Unique SiFi II Technology Generate the arbitrary waveforms points by points without distorting the signals. In comparison with the last generation of the SiFi technology, SiFi II has added multiple filters, supporting the dynamic adjustment of the edge time. Touch-enabled UI Design Provide brand new UI operation experience, supporting the tap and drag operation gestures. You can also use the keyboard to complete the parameter settings.
PAGE 3
The brand new heat dissipation structure desgin has undergone the strict thermal simulation test to ensure the steady operation of the instrument in a complex environment. DG800 Series Function/Arbitrary Waveform Generator Dimensions: W×H×D = 237.4 mm × 97 mm × 268 mm Weight: 1.
PAGE 4
Function Interface Dual-channel with the same performance (Optional) Ⅱ Arbitrary waveform function with the unique SiFi II technology Burst function Various analog and digital modulation functions RIGOL 4 160 built-in arbitrary waveforms
PAGE 5
Sweep function Standard harmonic generator function Dualtone function PRBS function RS232 function Sequence function RIGOL 5
PAGE 6
Waveform combine function Channel and system setting File management function RIGOL 6 Standard 7 digits/s, 240 MHz bandwidth frequency counter
PAGE 7
Specifications Unless otherwise specified, all the specifications can be guaranteed when the following two conditions are met. · The signal generator is within the calibration period. · The signal generator has been running ceaselessly for over 30 minutes under the specified operating temperature (23℃±5℃). All the specifications are guaranteed except the parameters marked with "Typical". DG800 series specifications Model Channel Max.
PAGE 8
Pulse Duty Rising/Falling Edge Overshoot Jitter (rms) Arbitrary Waveform Sequence Waveform Length Vertical Resolution Sample Rate Min Rise/Fall Time Jitter (rms) Overshoot Harmonic Output Harmonic Order Harmonic Type Harmonic Amplitude Harmonic Phase 16 ns to 1000 ks (limited by the current frequency setting) 0.001% to 99.
PAGE 9
Source Modulating Waveform Modulation Frequency PM Carrier Waveform Source Modulating Waveform Phase Deviation Modulation Frequency ASK Carrier Waveform Source Modulating Waveform Key Frequency FSK Carrier Waveform Source Modulating Waveform Key Frequency PSK Carrier Waveform Source Modulating Waveform Key Frequency PWM Carrier Waveform Source Modulating Waveform Width Deviation Modulation Frequency External Modulation Input Input Range Input Bandwidth Input Impedance Burst Characteristics Carrier Waveform
PAGE 10
Period Measurement Measurement Range Voltage Range and Sensitivity (non-modulating signal) DC Offset Range DC Coupling 1 μHz to 100 MHz 100 MHz to 240 MHz 1 μHz to 100 MHz AC Coupling 100 MHz to 240 MHz Pulse Width and Duty Cycle Measurement Frequency and Amplitude 1 μHz to 25 MHz Ranges Min.
PAGE 11
Overvoltage Protection Occurred when: The instrument amplitude setting is greater than 3.2 Vpp or the output AC+DC is greater than |1.6VDC| and the input voltage is greater than ±12 × (1 ± 5%)V (<10 kHz).Disruptive discharge voltage: ±5(Vac + dc). The instrument amplitude setting is smaller than or equal to 3.2 Vpp or the output AC+DC is smaller than |1.6VDC| and the input voltage is greater than ±2.6 × (1 ± 5%)V (<10 kHz).Disruptive discharge voltage: ±18(Vac + dc).
PAGE 12
Options and Accessories Description DG812 (10 MHz, Dual-channel) DG822 (25 MHz, Dual-channel) DG832 (35 MHz, Dual-channel) Model DG811 (10 MHz, Single-channel) DG821 (20 MHz, Single-channel) DG831 (30 MHz, Single-channel) 1 Power Cord conforming to the standard of the destination country 1 BNC Cable (only provided by DG832/DG831/DG822/DG821) Standard Accessories 1 Quick Guide 1 Product Warranty Card Option Optional Accessories Order No DG812 DG822 DG832 DG811 DG821 DG831 CB-BNC-BNC-MM-100 - Single-dual CH