Datasheet

7
RIGOL
Model 20 A Test Lead 40 A Test Lead 60 A Test Lead
Maximum Current 20 A 40 A 60 A
Maximum Voltage 150 V 150 V 150 V
Terminal M8/M8 M8/M8 M8/M8
Wire Gauge AWG14 AWG14×2 AWG14×3
Length 780 mm 780 mm 780 mm
Exterior Design
Sense Cables
Enable the sense function. Then, use the
sense cables to connect the sense terminals
and the output terminals of the DUT to
compensate for the voltage drop caused by
the load leads.
Cable length: 780 mm
USB-GPIB Interface Converter
Use the USB-GPIB interface converter to
extend the GPIB interface, and then use the
GPIB cable to connect the load to the PC to
build communication with the PC for remote
control.
Accessories Description
Shield
For safety considerations, a shield
shall be installed.
9-Pin RS232 Cable
To realize remote control, use the 9-pin
RS232 cable to build communication between
the load and the PC via the RS232 interface
on the rear panel of the load.
Rack Mount Kit for a single
instrument
It is used for installing a single instrument.
Rack Mount Kit for two
instruments
It is used for installing two instruments.
Three years for the mainframe.
Warranty Period
20 A/40 A/60 A Test Lead