User manual
RIGOL Chapter 2 Front Panel Operations
2-74 DL3000 User’s Guide
In CC/CV/CR/CP/Pul/Tog/Battery/OCP/OPP/CC+CV modes, menu items under
"Data" include I, U, R, and P. In Con mode, only I and U are included under
"Data".
(1) If "I" is selected to be the menu item under "Data", then the vertical axis
indicates the current, and the current waveform is displayed in the
interface.
(2) If "U" is selected to be the menu item under "Data", then the vertical axis
indicates the voltage, and the voltage waveform is displayed in the
interface.
(3) If "R" is selected to be the menu item under "Data", then the vertical axis
indicates the resistance, and the resistance waveform is displayed in the
interface.
(4) If "P" is selected to be the menu item under "Data", then the vertical axis
indicates the power, and the power waveform is displayed in the interface.
4. Mode
Only applicable to Con mode. Press Mode to switch the waveform output mode.
You can also use the Left/Right arrow key or the knob to switch it. Two modes
are available: Fast and Roll.
Fast: Displays trends of parameter changes in the form of high-speed
sampling, applicable to the waveforms with great changes.
Roll: Scrolling displays trends of parameter changes, applicable to the
waveforms with small changes.
When you select Fast mode, the window time is displayed in ms, and you cannot
set the time value by using the numeric keys, but only with the arrow keys and
the knob.
5. Pause/Start
Press Pause, and then the waveform stops outputting. When you press the
Start key again, the waveform restores to output again.
6. Print
After you insert the USB storage device, press Print to capture the screen or
images and save them in ".BMP" format to the USB storage device. Meanwhile,
save the corresponding data file in CSV format.
7. Record
After you insert the USB storage device, press Record to save the data file
automatically to the external memory in CSV format. During recording, "Record"
is displayed at the top of the interface. Press Record again to stop recording,
Tip
Fast mode is only available in Con mode for the waveform output. Roll mode
is, by default, available for other operation modes.