Specifications

RIGOL Chapter 2 Command System
Programming Guide for DM3000
2-14
The query returns 0, 1, 2 or 3.
26. :MEASure:CURRent:AC:DIGIt
Syntax
:MEASure:CURRent:AC:DIGIt?
:MEASure:CURRent:AC:DIGIt {INC|DEC|5|6|7}
Function
Sets the display digit for AC current measurement values.
Explanation
Refer to the “Explanation” in :MEASure:VOLTage:DC:DIGIt.
Example
Setting the display digit to 7:
:MEASure:CURRent:AC:DIGIt 7
Decreasing the display digit by one bit:
:MEASure:CURRent:AC:DIGIt DEC
27. :MEASure:CURRent:AC:FREQuency?
Syntax
:MEASure:CURRent:AC:FREQuency?
Function
The query returns the frequency currently measured by AC current
in the form of scientific notation such as +5.30803456e+02, the
unit is Hz.
Explanation
The meter should work under the AC current measurement while
you use this command.
28. :MEASure:CURRent:AC:FREQuency:DISPlay
Syntax
:MEASure:CURRent:AC:FREQuency:DISPlay
Function
Displays the frequency on the secondary screen (lower left) while
measuring AC current.
29. :MEASure:CURRent:AC:FREQuency:HIDE
Syntax
:MEASure:CURRent:AC:FREQuency:HIDE
Function
Hides the frequency on the secondary screen while measuring AC
current.
Explanation
The command is valid only when the frequency is displayed on the
secondary screen and the meter is measuring AC current.
30. :MEASure:CURRent:AC:FREQuency:STATe?
Syntax
:MEASure:CURRent:AC:FREQuency:STATe?
Function
Queries whether the frequency was displayed on the secondary
screen while measuring AC current.
The query returns DISPLAY or HIDE.