Specifications

Chapter 2 Command System RIGOL
Programming Guide for DM3000
2-19
Function
Sets the short-circuit resistance for continuity measurements.
Explanation
 <value> ranges from 1 to 2000, the unit is Ω.
 The “DEF” is 10.
Example
Setting the short-circuit resistance to 1 kΩ:
:MEASure:CONTinuity 1000
49. :MEASure:DIODe?
Syntax
:MEASure:DIODe?
Function
The query returns the voltage across the diode terminals in the
form of scientific notation such as -8.88800000E+03, the unit is V.
Explanation
The beeper will buzz when 0.1V≤V
MEASured
≤2.4 V during the diode
measurement.
50. :MEASure:DIODe:DIGIt
Syntax
:MEASure:DIODe:DIGIt?
:MEASure:DIODe:DIGIt {INC|DEC|5|6|7}
Function
Sets the display digit for diode measurement values.
The query returns 5, 6 or 7.
Explanation
Refer to the “Explanation” in :MEASure:VOLTage:DC:DIGIt.
Example
Setting the display digit to 7:
:MEASure:DIODe:DIGIt 7
Decreasing the display digit by one bit:
:MEASure:DIODe:DIGIt DEC
51. :MEASure:CAPacitance?
Syntax
:MEASure:CAPacitance?
Function
The query returns the capacitance measurement values in the form
of scientific notation such as +1.19195857E-09, the unit is F.
52. :MEASure:CAPacitance
Syntax
:MEASure:CAPacitance {0|1|2|3|4|5|MIN|MAX|DEF}
Function
Sets the range for capacitance measurements.
Explanation
 The measurement mode will changes to “Manual” while you
set the range.
 Each parameter has its own range:
Parameter
Range
0
2 nF