Specifications

Chapter 2 Command System RIGOL
Programming Guide for DM3000
2-27
1. :SYSTem:BEEPer
Syntax
:SYSTem:BEEPer
Function
Causes the beeper buzz once. This command is usually used to
test if the beeper works normally.
Explanation
Please turn on the beep before sending this command.
2. :SYSTem:BEEPer:STATe
Syntax
:SYSTem:BEEPer:STATe?
:SYSTem:BEEPer:STATe {ON|OFF|1|0}
Function
Sets the beeper state.
The query returns ON or OFF.
Default
ON
3. :SYSTem:CONFigure:POWEron
Syntax
:SYSTem:CONFigure:POWEron {LAST|DEF}
Function
Sets the power-on configurations.
The query returns LAST or DEF.
Default
DEF
4. :SYSTem:CONFigure:DEFault
Syntax
:SYSTem:CONFigure:DEFault
Function
Restores the meter into defaults.
5. :SYSTem:LANGuage
Syntax
:SYSTem:LANGuage?
:SYSTem:LANGuage {CHinese|ENglish}
Function
Sets the display language.
The query returns CHINESE or ENGLISH.
Default
CHinese
6. :SYSTem:CLOCk:STATe
Syntax
:SYSTem:CLOCk:STATe?
:SYSTem:CLOCk:STATe {HIDE|DISPLay |1|0}
Function
Sets the clock state.
“DISPLay” and “1” denote to display the clock on the meter
interface; “HIDE” and “0” denote to hide the clock.
The query returns DISPLAY or HIDE.