Specifications

Chapter 2 Command System RIGOL
Programming Guide for DM3000
2-31
:UTILity Commands
The commands are used to configure the communications of the meter and execute
self-test. Before any communications, make sure that the related communication
interface has been connected stably, otherwise it may cause anomalies or errors. The
commands mainly include:
 :UTILity:INTErface:LAN:DHCP
 :UTILity:INTErface:LAN:AUTOip
 :UTILity:INTErface:LAN:MANUip
 :UTILity:INTErface:LAN:IP
 :UTILity:INTErface:LAN:MASK
 :UTILity:INTErface:LAN:GATEway
 :UTILity:INTErface:LAN:DNS
 :UTILity:INTErface:GPIB:ADDRess
 :UTILity:INTErface:RS232:BAUD
 :UTILity:INTErface:RS232:PARIty
 :UTILity:INTErface:USB:ID?