Specifications

Chapter 2 Command System RIGOL
Programming Guide for DM3000
2-51
1. :SCAN:PROJect?
Syntax
:SCAN:PROJect?
Function
Queries the name of created scan project.
2. :SCAN:PROJect:CREAte
Syntax
:SCAN:PROJect:CREAte?
:SCAN:PROJect:CREAte <name>
Function
Creates a scan project with a specified name.
Queries if a task has been created for the current scan project. The
query returns True if an available task is existed, or else returns
False.
Explanation
<name> should be a value that was composed of letters a - z, A - Z
and numbers within 0 and 9 and within 15 characters.
3. :SCAN:PROJect:CURRently:CYCLe?
Syntax
:SCAN:PROJect:CURRently:CYCLe?
Function
Queries the number of cycles of the current scan project.
The query returns an integer.
Explanation
For the details setting method please refer to :SCAN:RUN.
4. :SCAN:TASK:ADD
Syntax
:SCAN:TASK:ADD
{<TaskNum>,<Channel>,<Function>,<Range>,<Resolution>,<Sal
mpleNum>,<Delay>}
Function
Adds a task for the current scan project.
Explanation
 <TaskNum> denotes the task number from 0 to 99.
If no tasks are added before this number of task, the meter will
automatically use the current configurations to fill these spaces.
<Channel> denotes the scan channel currently used by this task
and ranges from 1 to 16. Thereinto, DCV, ACV, 2WR, FREQ,
PERI, CAP and DIODE can use channel 1 to channel 12; while,
DCI and ACI can use channel 13 to channel 16.
 <Function> denotes the measurement function currently used
by this task and can be:
DCV|ACV|DCI|ACI|resistance|DIODe|CAPacitance|period|frequ
ency.
 <Range>: denotes the measurement range of the current task,