Specifications

Chapter 3 Commands Compatibility RIGOL
Programming Guide for DM3000
3-3
{<value>|MINimum}
CALCulate:LIMit:UPPer?
{MINimum|MAXimum}
CALCulate:LIMit:UPPer {<value>|MAXimum}
Query and set the upper limit of the current
measurement function.
CALCulate:NULL:OFFSet?
{MINimum|MAXimum}
CALCulate:NULL:OFFSet
{<value>|MINimum|MAXimum}
Query and set the offset of the NULL.
CALCulate:STATe?
Query the state of the calculation.
CONFigure?
Queries the current configurations of the
instrument.
CONFigure:CAPacitance
[{<range>|AUTO|MIN|MAX|DEF}
[,{<resolution>|MIN|MAX|DEF}]]
Restores all of the capacitance measurement
parameters and trigger parameters to their defaults,
and then configure the meter for capacitance
measurements.
CONFigure:CONTinuity
Restores all of the continuity measurement
parameters and trigger parameters to the defaults,
and then configures the meter for continuity
measurements.
CONFigure:CURRent:AC
[{<range>|AUTO|MIN|MAX|DEF}
[,{<resolution>|MIN|MAX|DEF}]]
Restores all of the AC current measurement
parameters and trigger parameters to the defaults,
and then configures the meter for AC current
measurements.
CONFigure:CURRent[:DC]
[{<range>|AUTO|MIN|MAX|DEF}
[,{<resolution>|MIN|MAX|DEF}]]
Restores all of the DC current measurement
parameters and trigger parameters to the defaults,
and then configures the meter for DC current
measurements.
CONFigure:DIODe
Restores all of the diode measurement parameters
and trigger parameters to the defaults, and then
configures the meter for diode measurements.
CONFigure:FREQuency
[{<range>|MIN|MAX|DEF}
[,{<resolution>|MIN|MAX|DEF}]]
Restores all of the frequency measurement
parameters and trigger parameters to the defaults,
and then configures the meter for frequency
measurements.
CONFigure:FRESistance
[{<range>|AUTO|MIN|MAX|DEF}
Restores all of the 4-wire resistance measurement
parameters and trigger parameters to the defaults,