Specifications

RIGOL Chapter 3 Commands Compatibility
Programming Guide for DM3000
3-4
[,{<resolution>|MIN|MAX|DEF}]]
and then configures the meter for 4-wire resistance
measurements.
CONFigure:PERiod
[{<range>|MIN|MAX|DEF}
[,{<resolution>|MIN|MAX|DEF}]]
Restores all of the period measurement parameters
and trigger parameters to the defaults, and then
configures the meter for period measurements.
CONFigure:RESistance
[{<range>|AUTO|MIN|MAX|DEF}
[,{<resolution>|MIN|MAX|DEF}]]
Restores all of the 2-wire resistance measurement
parameters and trigger parameters to the defaults,
and then configures the meter for 2-wire resistance
measurements.
CONFigure[:VOLTage]:AC
[{<range>|AUTO|MIN|MAX|DEF}
[,{<resolution>|MIN|MAX|DEF}]]
Restores all of the AC voltage measurement
parameters and trigger parameters to the defaults,
and then configures the meter for AC voltage
measurements.
CONFigure[:VOLTage][:DC]
[{<range>|AUTO|MIN|MAX|DEF}[,{<resolut
ion>|MIN|MAX|DEF}]]
Restores all of the DC voltage measurement
parameters and trigger parameters to the defaults,
and then configures the meter for DC voltage
measurements.
DATA:COPY
Saves the measurement history data into the “File
10” under the “MeasData” in the nonvolatile
memory of the instrument with the name of
“MeasData”.
To view these data, press “Save” and go to
“MeasData - File 10”.
DATA:DELete NVMEM
Deletes the data saved in the nonvolatile memory
by command “DATA:COPY”.
DATA:LAST?
Queries the latest measurement results.
DATA:POINts?
[{RDG_STORE|MNMEM}]
Queries the number of the current value. This
number corresponds to the number of the
measurement shown in the measurement history.
FETCh?
Queries readings from the instrument’s output
buffer where you can read them into your computer.
FETCh:CURRent:AC:PTPeak?
Queries the difference between the highest and
lowest transient current levels detected in the most
recent AC current measurement.
FETCh:CURRent[:DC]:PEAK:MAXimum?
Queries the highest transient current levels
detected in the most recent DC current
measurement.