Specifications

Chapter 3 Commands Compatibility RIGOL
Programming Guide for DM3000
3-7
{<range>|MIN|MAX|DEF}
[SENSe:]CURRent[:DC]:RESolution?
[{MIN|MAX}]
[SENSe:]CURRent[:DC]:RESolution
{<resolution>|MIN|MAX|DEF}
Query and set the resolution for DC current
measurements.
[SENSe:]FREQuency:APERture?
[{MIN|MAX}]
[SENSe:]FREQuency:APERture
{<second>|MIN|MAX|DEF}
Query and set the aperture time for frequency
resistance measurements.
[SENSe:]FREQuency:NULL[:STATe]?
[SENSe:]FREQuency:NULL[:STATe]
{ON|OFF}
Query and set the NULL state for frequency
resistance measurements.
[SENSe:]FREQuency:NULL:VALue?
[{MIN|MAX}]
[SENSe:]FREQuency:NULL:VALue
{<value>|MIN|MAX}
Query and set the NULL value for frequency
resistance measurements.
[SENSe:]FREQuency:RANGe:LOWer?
[{MIN|MAX}]
[SENSe:]FREQuency:RANGe:LOWer
{<filter>|MIN|MAX|DEF}
Query and set the lower value of AC bandwidth
under frequency measurement. The <filter> can be
3, 20 or 200. The “DEF” is 20.
[SENSe:]FREQuency:VOLTage:RANGe:AUTO
?
[SENSe:]FREQuency:VOLTage:RANGe:AUTO
<mode>
Query and set the voltage automatic range state for
frequency measurements.
[SENSe:]FREQuency:VOLTage:RANGe[:UPPe
r]? [{MIN|MAX}]
[SENSe:]FREQuency:VOLTage:RANGe[:UPPe
r] {<voltage_range>|MIN|MAX|DEF}
Query and set the voltage range for frequency
measurements.
[SENSe:]FRESistance:APERture?
[{MIN|MAX}]
[SENSe:]FRESistance:APERture
{<second>|MIN|MAX|DEF}
Query and set the aperture time for frequency
measurements.
[SENSe:]FRESistance:NPLC? [{MIN|MAX}]
[SENSe:]FRESistance:NPLC
{<PLCs>|MIN|MAX|DEF}
Query and set the aperture time for 4-wire
resistance measurements. Note that the input value
and return value are both multiple of PLC.
[SENSe:]FRESistance:NULL[:STATe]?
[SENSe:]FRESistance:NULL[:STATe]
Query and set the NULL state for 4-wire resistance
measurements.