Specifications

RIGOL Chapter 3 Commands Compatibility
Programming Guide for DM3000
3-8
{ON|OFF}
[SENSe:]FRESistance:NULL:VALue?
[{MIN|MAX}]
[SENSe:]FRESistance:NULL:VALue
{<value>|MIN|MAX}
Query and set the NULL value for 4-wire resistance
measurements.
[SENSe:]FRESistance:RANGe:AUTO?
[SENSe:]FRESistance:RANGe:AUTO <mode>
Query and set the automatic range state for 4-wire
resistance measurements.
[SENSe:]FRESistance:RANGe[:UPPer]?
[{MIN|MAX}]
[SENSe:]FRESistance:RANGe[:UPPer]
{<range>|MIN|MAX|DEF}
Query and set the range for 4-wire resistance
measurements.
[SENSe:]FRESistance:RESolution?
[{MIN|MAX}]
[SENSe:]FRESistance::RESolution
{<resolution>|MIN|MAX|DEF}
Query and set the resolution for 4-wire resistance
measurements.
[SENSe:]FUNCtion[:ON]?
[SENSe:]FUNCtion[:ON] "<function>"
Query and set the current measurement function
for the instrument.
[SENSe:]MEASure:CAPacitance?
[{<range>|AUTO|MIN|MAX|DEF}
[,{<resolution>|MIN|MAX|DEF}]]
Resets all capacitance measurement parameters
and trigger parameters to their defaults, and then
configures the meter for capacitance
measurements and immediately triggers a
measurement. The results are sent directly to the
instrument output buffer.
[SENSe:]MEASure:CONTinuity?
Resets all continuity measurement parameters and
trigger parameters to their defaults, and then
configures the meter for continuity measurements
and immediately triggers a measurement. The
results are sent directly to the instrument output
buffer.
[SENSe:]MEASure:CURRent:AC?
[{<range>|AUTO|MIN|MAX|DEF}
[,{<resolution>|MIN|MAX|DEF}]]
Resets all AC current measurement parameters and
trigger parameters to their defaults, and then
configures the meter for AC current measurements
and immediately triggers a measurement. The
results are sent directly to the instrument output
buffer.
[SENSe:]MEASure:CURRent[:DC]?
[{<range>|AUTO|MIN|MAX|DEF}
Resets all DC current measurement parameters and
trigger parameters to their defaults, and then